Cyclic Corrosion Test (CCT) Chamber

Cyclic Corrosion Test (CCT) Chamber
Request a Quote

The cyclic corrosion test chamber integrates the functions of a temperature humidity chamber and a salt spray chamber to simulate different climates, including salt fog, dry, humid, constant temperature and low temperature environments. These climates can be used in any sequence or combination to determine product safety and quality.

We provide custom-made cyclic corrosion test chambers in different dimensions and functions according to specific customer requirements.

Parameters
Model CZ-90D CZ-120D CZ-160D CZ-200D
Workspace Dimensions-H x W x D (cm) 90x60x50 120x80x50 160x100x50 200x120x60
Exterior Dimensions-H x W x D (cm) 141x88x128 190x110x140 230x130x140 270x150x150
Temperature Range -20℃, -10℃, RT~80℃
Humidity Range 20%~98%
Temperature Uniformity ±0.1℃;±0.1%R.H./±1.0℃;±3.0%R.H.
Temperature Control Tolerance ±1.0℃;±2.0%R.H./±0.5℃;±2.0%R.H.
Workspace Temperature NSS ACSS: 35℃±1℃/ CASS: 50℃±1℃
Humidifier Temperature NSS ACSS: 47℃±1℃/ CASS: 63℃±1℃
Power (optional) AC220V1Φ15A AC220V1Φ20A AC220V1Φ20A AC220V1Φ30A
Features
  • The cyclic corrosion test chamber is equipped with LCD touch screen and temperature and humidity controller. It can total record the temperature curves and humidity curves.
  • It can control the temperature and humidity in the chamber accurately.
  • Testing period for each step can be pre-set from 0 to 999h 59min.
  • Cycles are able to be pre-set from 1 to 999 times for each step or all steps.
  • The power-off memory function can save the test state in the case of abrupt power failure or the need to cut off the power during the test, and the test will resume when the power is on again.
  • It can connect computer via RS232 interface.
Related products
Send Message
Inquiry
Inquiry