Test Chamber

Test Chamber
Test Chamber
Test Chamber
Test Chamber
Test Chamber
Request a Quote

We equipped our test chamber with a tension tester using a micro-computer, needle inspecting machine, push pull force gauge, QSS Color Assessment Cabinet, salt spray corrosion test cabinet, and electric color fastness abrasion tester. The chamber is employed to test performances such as tension limit, color fastness, abrasion resistance, and corrosion resistance.

The HD-6016E automatic needle detector is utilized to detect if there is any metal residue such as as broken needles, steel nails, iron wires, or staples left in the handbag off-cuts, semi-finished products, or finished accessories.
(The employment of five-bit digital tube and the ten-segmentation display window can guarantee the high-efficient and precise automatic screening and recording of number of the qualified, unqualified and the total)

The QSS Color Assessment Cabinet is used to check the colors of leather materials/fabrics/accessories/metals/packaging material and so on, and conduct visual color-comparison under artificial daylight and specific environment.

The salt spray corrosion test cabinet can simulate the dispersion system, in which there are tiny droplets containing salt, to test the anti-corrosion performance of leather products, metals, plastics, FPC board after treated by coating, electroplating, organically/inorganically filming, anti-corrosion treating. All the tests included are NSS(neutral salt spray), ASS(acetic salt spray), CASS(copper accelerated acetic acid salt spray) and so on.

The electric abrasion color-fastness tester: The dry/wet abrasion color-fastness tester is composed of control system and abrasion system, which can conduct cyclic dry/wet abrasion color-fastness tests for fabrics made of such materials as cotton, wool, silk, knit-ware, printed textiles, under the standards stipulated by AATCC, ISO and so on.

The micro-computer tension tester is applicable for such processes as tensile testing, adhesive strength testing, peeling testing, tear testing, anti-compression testing, bending testing, anti-shearing testing and three-point bending strength testing for such materials as thin films, rubber belt, plastics, leather, metals, nylon thread, textiles, paper and so on.

The pointer-type push pull force gauge is used to conduct strength test(tensile experiment, compressive test, shear experiment and the alike), attractive force/electromagnetic force/magnetic repulsion for various materials, and can not only sample at a frequency of 1000Hz, but also store and analyze data.

Send Message
Inquiry
Inquiry