Precision Salt Spray Test Chamber

Precision Salt Spray Test Chamber
Precision Salt Spray Test Chamber
Precision Salt Spray Test Chamber
Precision Salt Spray Test Chamber
Precision Salt Spray Test Chamber
Request a Quote

The salt spray testing chamber is used to test the corrosion resistance on product surfaces after they have been coated in varnish, oil, or another coating material, or after they have been electroplated or anodized in order to prevent the underlying materials from becoming corroded. This testing chamber is widely used in hardware, electroplating, electronics, chemical, communication, automobile, space industries and more. These chambers assist the manufacturer in determining product capabilities in special environments by simulating a corrosive environment. Control is done through a touch tone controller.

Parameter
Model KM-F-60A KM-F-90 A KM-F -120 A KM-F-160 A KM-F -200 A
Interior dimensions (L*W*H) 600*450*400mm 900*600*500mm 1200*800*500mm 1600*1000*500mm 2000*1000*600mm
Exterior dimensions (L*W*H) 1070*580*1030mm 1380*800*1150mm 1700*900*1210mm 2250*1200*1250mm 2650*1200*1350mm
Temperature range 35℃-55℃
Temperature fluctuation ±0.5℃
Temperature uniformity ±2℃
Temperature precision ±1℃
Testing chamber temperature Spraying (NSS AASS) 35±1℃; Spraying (CASS) 50±1℃
Pressure tank temperature Spraying (NSS AASS) 47±1℃; Spraying (CASS) 63±1℃
Salty water temperature 35℃±1℃
Spraying rate 1.0-2.0ml/80cm²/hr
PH NSS(6.5-7.2);AASS CASS(3.1-3.3)
Interior volume 108L 270L 480L 800L 1200L
Salty water tank volume 10L 15L 20L 20L 30L
Power supply 1 phase,AC220V,50/60Hz,20A 3 phase,AC380V,50/60Hz,30A
  • Sensor
  • Sprayer
  • Collection hopper
  • Pressure gauge
Features
  • The machine is made of grade A, gray PVC, and is resistant to high temperatures, humidity and corrosion. It features a compact, deformation resistant structure.
  • The specially designed pressure tank solves any water deficiency, something that often appears in common pressure tanks.
  • The V shaped sample shelf can individually change its angle from 15° to 30°, ensuring products are fully covered by the salty water. The shelf can also hold numerous samples.
  • The upper cover's angle is made of a 5mm thick PVC plate with a high toughness and 100% transparency, ensuring water drops slide into a sealed groove and will not fall into the samples.
  • The chamber can remember resting periods during testing, and will continue testing after power returns in the event of a power failure.
  • The salt spray chamber features a number of functions, including over temperature, overpressure, and overload protection and a low water level warning to ensure normal testing chamber operations.
Related products
Send Message
Inquiry
Inquiry