NNT4-4/38300P Three Phase Voltage Regulator

NNT4-4/38300P Three Phase Voltage Regulator
NNT4-4/38300P Three Phase Voltage Regulator
NNT4-4/38300P Three Phase Voltage Regulator
NNT4-4/38300P Three Phase Voltage Regulator
Request a Quote

The NNT4-4/38300P three phase voltage regulator is applied in the heating industry like the industrial furnace, glass furnace, oven, petrochemical industry and shoe machinery.

Model explanation
Parameters of the three phase voltage regulator
Applicable voltage 11type:Three phase voltage AC85~120V---50/60Hz
38 type:AC200~480V---50/60Hz
Load current 25A/40A/75A/100A/125A/150A/200A/250A/300A
Auxiliary power supply PCB board working power supply:AC220V±10% 50/60Hz
Phase-shifting angle The central point of 0~150° delta-connected load or star-connected load (HHT4-4) does not connect the wire.
The central point of 0~175°star-connected load (HHT-4-5) connects the wire.
Over temperature alarm The device will alarm when its temperature over 75℃.
Input signal 4~20Ma,0~10V
Service environment Temperature-10~55℃ Humidity below 90%RH
Withstand voltage strength AC2000V/1minute(Among the heat sinks of the power supply)
Insulation resistance Above20M Ω/500V(Among the heat sinks of the power supply)
Output waveform diagram
Output quantity Output waveform
Control mode 10%output 50%output 90%output
Phase control

Phase control:
Continuous intersection control, stable output, ampere meter dose not jitter, but each cycle the half-wave will generate harmonic wave.

Applicable load:
Three-phase half control, constant impedance load, far infrared, tubular IR lamp and silicon carbide rod.

Features
  • The three phase voltage regulator has many kinds of control input signal(4~20MA/0~5V/0~10V/1~5V/2~10V,etc.), and user can choose it according to his demand.
  • The voltage regulator has the modes of manual adjustment of internal and external power outputs + automatic adjustment.
  • The three phase voltage regulator has the fuse open circuit indicator light/load short circuit, open circuit indicator light(optional)/SCR high temperature(75℃) indicator light and abnormity alarm connector.
  • The device displays the percentage 0~100% of load output power.
  • The three phase voltage regulator has the load buffering heat time(about 15 seconds).
  • If the SCR over the rated temperature or the fuse burn-out the device will stop output, and just after the troubleshooting the device will restart output.
  • The three phase voltage regulator is equipped with fast fuse to prevent the SCR from damaging, and the fuse can be dismounted easily.
  • The voltage regulator has the heat sink with high efficiency which conducts the heat fast and has good heat dissipation.
  • The mains frequency has the automatic surveillance function, the parameter in the 50~60Hz are available and does not need any switch.

1. Product model specification, 2. control function, 3. indicating sticker, 4. control signal terminal indicating sticker, 5. main power source, 6. load protection cover, 7. fuse, 8. axial flow fan and heat sink.)


Exterior and installation size
Current
A
Exterior dimension Fixed dimension Screw Cooling method
Length
L
Width
W
Height
H
D1 D2 W1
25 150 130 164 80 0 116 M5,M6 Natural cooling
40 150 130 164 80 0 116 M5,M6 Forced cooling
75 218 130 168 112 0 116 M5,M6
100 218 130 168 112 0 116 M5,M6
125 285 148 210 170 0 137 M8
150 285 148 210 170 0 137 M8
200 285 148 210 170 0 137 M8
250 335 275 240 112 112 265 M8,M10
300 335 275 240 112 112 265 M8,M10
※ Above 400A is the customized product.

Index
electric regulator, voltage stabilizer, electrical device

Related products
Send Message
Inquiry
Inquiry