Vertical Coal Fired Thermal Oil Boiler

Vertical Coal Fired Thermal Oil Boiler
Vertical Coal Fired Thermal Oil Boiler
Vertical Coal Fired Thermal Oil Boiler
Request a Quote

Heating capacity : (60-200)×104kCal/h
Designed pressure: 1.1MPa
Maximum working temperature: 320℃
Fuel type: anthracite coal, meagre coal, lignitous coal, bituminous coal

Application

The coal fired thermal oil boiler is also known as an organic heat carrier boiler, and is an industrial boiler used in low pressure, high temperature environments in order to provide highly efficient thermal energy. It is widely used in chemical factories, plastic processing plants, textile processing plants, rubber plants, food processing plants, paper plants and bitumen plants.

The vertical structure features a better performance than the horizontal structure:

1. The exhaust gas flow is perpendicular to the heated surface, and flows top to bottom. The temperature distribution of the exhaust gas is uniform in the same section, so that the thermal efficiency is higher.
2. A vertical structure thermal oil boiler features a better sealing performance during the installation process.
3. Vertical thermal oil boilers cover a smaller area, thus saving floor space.

Technical parameters:
Type Heating capacity× 104 (kCal/h) System thermal efficiency ( % ) Designed pressure ( MPa ) Maximum working temperature (℃) Medium circulation flow ( m3/h ) Main tube diameter ( DN ) Installed capacity ( Kw )
TGL-180M 15 73 1.1 320 12.5 40 8.5
YGL-300M 25 73 1.1 320 40 80 15
YL(G) L-350M 30 73 1.1 320 40 80 18 ( 15 )
YL(G) L-460M 40 73 1.1 320 60 100 24 ( 25 )
YL(G) L-700M 60 76 1.1 320 80 100 28 ( 25 )
YL(G) L-1000M 80 76 1.1 320 100 125 45 ( 40 )
YL(G) L-1200M 100 76 1.1 320 100 125 53 ( 48 )
YL(G) L-1400M 120 76 1.1 320 100 125 60 ( 55 )
YL(G) L-1600M 140 78 1.1 320 100 125 60
YL(G) L-1900M 160 78 1.1 320 160 150 80 ( 73 )
Manufacturing process features

The vertical coal fired boiler features complex processing links, and utilizes fine processing, which is an important factor in final product quality and safe usage by the customer.

1. Boiler material: seamless steel pipe
2. Welding process: Argon arc welding and radiographic testing
3. Bending shaping: The tube is shaped after the bending process in the pipe bending machine in order to ensure the coil outline dimension accuracy and ensure it meets GB/T17410 standards.
4. Water pressure testing: After shaping, the water pressure test for the tube is carried out before the boiler leaves the factory.

Features

1. Protection function
· Automatically alarm when the liquid level inside the expansion tank is too low.
· Automatically alarm when the thermal oil outlet pressure exceeds rated pressure
· Automatically alarm when the thermal oil temperature is too high
· The system will automatically stop, and sends out an acousto-optic alarm signal if there are any abnormal conditions, such as a shutdown of the circulating pump.

2. Automatic detection function
· The control system can automatically detect pressure and temperature of the heat medium.
· The control system can automatically detect the outlet temperature of the heat medium, and maintain it within the pre-set range.

Related products
Send Message
Inquiry
Inquiry