Pull-Off Adhesion Tester

Pull-Off Adhesion Tester
Pull-Off Adhesion Tester
Pull-Off Adhesion Tester
Request a Quote
TBTDGN-40 Pull-Off Adhesion Tester

TBTDGN-40 pull-off adhesion tester is a dual use tester. It can be used to evaluate strength of concrete (C10~C80) by measuring the required-force to pull off embedded expansion bar from concrete mass, and test bond strength of exterior wall decorative bricks by measuring the pulling force applied to bonded bricks from the substrate.

Technical Parameters
  • Display mode (unit): kN, Mpa switchable
  • Hydraulic cylinder stroke: 8mm
  • Measuring range: 0~40kN
  • Resolution: 0.001kN
  • Measurement accuracy: better than 1% (F.S)
  • Loading peak hold: yes
  • Data storage: more than 500
  • LCD lighting: yes
  • Numerical correction: automatic folding line with high accuracy
  • Power supply: 8.4V lithium battery
  • Auto power off function: yes
TBTIB-6000 Pull-Off Adhesion Tester

TBTIB-6000 bond strength tester is a compact portable machine to test adhesive strength of decorative bricks, mosaics, plates, paints, surface coatings on its support and various exterior building materials on external walls. This pull-off adhesion tester also can test bond strength of external insulation materials (EPS board, SPS board).

Technical Parameters
  • Structure: integrated
  • Hydraulic cylinder stroke: 10mm
  • Display mode: KN, Mpa, switchable
  • Measuring range: 0~10kN
  • Resolution: 0.001kN
  • Peak hold: yes
  • Data storage: more than 500
  • Main material: high-strength aluminum alloy, lightweight material
  • Body weight: 2.0kg
Anchor Tensiometer

Model: TBTML-series
Anchor Tensiometer is used for determining the pullout strength of hardened concrete in test specimens or structures by measuring the force required to pull an embedded metal rod, steel bar and the attached concrete fragment from a concrete mass.

For embedded inserts after the concrete hardening, it is available in the kit model 58-C0178/3, that includes a professional electrical drill with suitable power, SDS mandrel, 18mm drill bit for concrete, pack of 10 expanding plugs dia. 18mm x 80mm and manual air pump for dust cleaning. (This apparatus does not match all the requirements of the Standard UNI 10157, EN 12504-3).

Case dimension: 520x430x390mm

Weight approx.: 11kg

TBTML-series pull out test apparatus is suitable for testing the anchorage force of bolt, steel bar, expansion bolt, etc.

Technical Parameters
Model Cylinder center hole Cylinder stroke Test range Cylinder weight Anchor size Pull rod Conversion head
10T 27mm 60mm 0-100kN 5.5kg Ø6-20 M18 M6-20
20T 35mm 80mm 0-200kN 13kg Ø6-25 M24 M6-24
30T 45mm 80mm 0-300kN 15kg Ø6-32 M30 M6-30
50T 60mm 120mm 0-500kN 25kg Ø6-40 M39 M6-36
100T 85mm 150mm 0-1000kN 58kg Ø25-40 M45 M30-39
Related products
Send Message
Inquiry
Inquiry