Multi-shape Building Machine

Multi-shape Building Machine
Multi-shape Building Machine
Multi-shape Building Machine
Multi-shape Building Machine
Multi-shape Building Machine
Request a Quote
This product has been discontinued and removed from our shelves.
Main Technical Specification
Size 11000mm×2200mm×2100mm (with double axles and 8 tires)
Thickness of bending leaf 10mm
Cutting type Hydraulic cutting device
Total weight About 10 Ton
Total motor power: 19.15kw
Main motor power 5.5kw
Bending power 3.0kw 2.2kw
Hydraulic station power 5.5kw
Servo power 0.75kw
Seaming power 1.1kw 1.1kw
Material of rollers 45# steel, quenched HRC 55~65, plated with hard chrome.
Bearing Made in Harbin
Width of steel sheet
Feeding width 600mm
Finished width 305mm
Utilization ratio 50.8%
Rolling thickness 0.6-1.5mm
Working speed
Straight sheet 15m/min.
Arch sheet 13m/min.
Seaming 16m/min.
Uncoiler
Inner diameter of coil 450mm~650mm
Max. width of fixed coil 600mm~620mm
Cutting material 12CrMoV, heat treatment
Forming type Roll-formed and length-set cutting
Material of shafts 45# steel, galvanized
Step of molding 13 1
Applicable span 5m~20m
Load 10Ton

BOHAI multi-shape building machine is different from the ultimate building machine like k span machine and super k span machine made by MIC. It is mainly shown from several aspects as below.

1. Appearance
Our multi-shape arch plate forming machine is a vertical machine with triple axles. Through reducing the labor intensity, it lowers the cost of project. Moreover, the mechanical control and hydraulic control are optional. All the ultimate building machines made by MIC are configured with triple axles and hydraulic control system. The length reaches 10400mm.

2. Structure
This multi-shape building machine is composed of the galvanized shaft made of 45# high-quality steel, quenched 45# steel roller with hard chrome plating, 12CrMoV cutter with excellent heat treatment, automotive rear bridge as axle, superior 900-20 sized tires and so on. Aside from enlarged loading capacity, its impact resistance and damping effect are also enhanced.

K span machine made by MIC is designed with full steel and burnished aluminum structure, precise steel forming rollers with hard chrome plating.

3. Software
Our construction machine applies the PLC, servo motor and software designed by local engineer. The ultimate building machine like k span machine and super k span machine made by MIC runs under the full control of the software loaded.

4. Operation
BOHAI multi-shape building machine is a user-friendly machine due to its simple structure. It is very easy to train the operators. However, the ultimate building nachine made by MIC is complex in structure, and the operator has to be trained professionally prior to operation.

5. Price
The price of our machine plate ranges from US$100,000 to US$200,000, yet that of the super K span machine made by MIC is much higher.

Related products
Send Message
Inquiry
Inquiry