Shanghai MITSUBISHI Escalator Series K

Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Shanghai MITSUBISHI Escalator Series K
Request a Quote
RemarkStandard Functions01 Protection of phase dislocation and phase loss3EWhen phase dislocation or phase loss of input power supply occurs, the main circuit and control circuit will be cut off, in order to automatically stop the escalator.02 Non-operation reversal protectionARPIf reverse movement occurs by accident during operation, the device will cut off the power supply of driving unit and brake.03 Additional brakeAUX-BKThe additional brake system will stop the escalator before that the operating speed is 1.4 times higher than the rated speed, or when the running direction changes.When lifting height exceeds 6000mm04 Operating brakeMUSTACHEThe driving device is equipped with an operating brake. When the operating brake works, the escalator will stop.05 Safety device of comb plateCSSIf something gets stuck between comb plate and the pedal, the device will cut off the power supply of the driving unit and the brake.06 Safety device of drive chainDCSIf the drive train breaks or elongates abnormally, the device will cut off the power supply of driving unit and brake.07 Emergency stop buttonE-STOPWhen an emergency occurs, press the emergency stop button to cut off the power supply of driving unit and brake.08 Speed limiting device for low speedGOVIf the speed is lower than rated speed by 20%, the device will cut off the power supply of motor and brake.09 Handrail inlet coverHGBThe long, flexible rubber cover covers at the handrail inlet, to avoid pinching or other accidents.10 Speed limiting device 1HGD1The device will cut off the power supply of driving unit and brake when the operating speed reaches 1.2 times of the rated speed.11 Speed limiting device 2HGD2In the operating speed exceeds the rated speed of 1.4 times before, the device operation, and cut off the additional brake power.When the lifting height exceeds 6000mm12 handrail entry safety deviceHGSIf a foreign object into the handrail at the entrance card, the device will shut down the drive and the host of the brake power.13 step chain safety deviceSCSIf the rung-strand breaks or abnormal elongation, the device will cut off the host drive and brake power.14 Cascade subsidence safety deviceSRSIf any part of the rung subsidence damage can not be properly engaged with the upper or lower comb plate, the device will cut off the host drive and brake power.Optional Functions15 signal interface meansBAThis output means escalator basic operational status signal.When the Model KS-LB, KS-SB, KS-B can only choose one time16 Elevator Monitoring SystemSMOS-IIThe system uses state of the computer operation and fault monitoring of the escalator or walkway17 skirting safety deviceSSSWhen a foreign body is sandwiched between steps and skirting, the device will shut down the drive and the host of the brake power.

Basic Specific

projectSpecifications ContentRemark
Armrest nominal width (mm)12001000800 *
Width between the armrest (mm)12281028828
Escalator nominal width (mm)1000800600
Theory of transmission capacity (person / hour)900067504500
Series ModelKS-B/KS-LB, KS-LB/KS-LBF, KS-SF/KS-SBF
The inclination angle (degrees)30, 35
Speed (m / S)0.5
Escalators lift height (mm)1400-7000The inclination angle is 30 ° when
1606-6000The inclination angle is 35 ° when
Power supply380V50Hz three-phase
Lighting power220V50Hz single-phase
Cascade horizontal movement distance (mm)800 (Level 2 step); 1200 (Level 3 rungs)Lifting height (HE) ≦ 6000mm when
1200 (Level 3 rungs)Lifting height (HE) > 6000mm when
Environmentindoor
Passengers photoelectric typeBuilt-in skirt photoelectricFrequency specifications, step ladders, multi ladder select Configure
External photoelectric columnFrequency specifications, single-staircase, the choice of configuration (with Shanghai Mitsubishi Elevator Co.,Ltd. multi ladder)

Note: For model KS-SB/KS-SBF, the handrail nominal width of 800mmis not available.

Power Supply Data

Power Supply for Running (3 Phases)

Handrails nominal widthLifting height by HE (mm)Power supply capacity (kVA)
1200HE ≦ 40008
4000 < HE ≦ 600010.4
6000 < HE ≦ 700012.5
1000HE ≦ 50008
5000 < HE ≦ 700010.4
800HE ≦ 70008

Power Supply for Lighting (Single Phase)

Series ModelLighting height by HE (mm)Power supply capacity (kVA)
KS-LB/KS-LBFHE ≦ 40002
4000 < HE ≦ 60002.3
6000 < HE ≦ 70002.5
KS-B/KS-BFHE ≦ 70001.3
KS-SB/KS-SBFHE ≦ 70001.3
projectstandardOptionalRemark
An upper truss length TJ ( mm )24372437 ~ 5137Tilt angle of 30 [deg.] , Level 2 the rung
28422842 ~ 5542The inclination angle of 30 [deg. , Level 3 rung
24972497 ~ 5197Tilt angle of 35 [deg.] , Level 2 the rung
29022902 ~ 5602The inclination angle of 35 [deg. , Level 3 rung
The length of the lower portion of the truss the TK ( mm )21802180 ~ 4880Tilt angle of 30 [deg.] , Level 2 the rung
25852585 ~ 5285The inclination angle of 30 [deg. , Level 3 rung
22152215 ~ 4915Tilt angle of 35 [deg.] , Level 2 the rung
26202620 ~ 5320The inclination angle of 35 [deg. , Level 3 rung
An upper truss depth of the FJ ( mm )1060

The lower part of the truss depth of FK ( mm )1060

Central truss depth of the FC ( mm )918
The inclination angle is 30 ° when
938
The inclination angle is 35 ° when
Escalator Width ( mm )1550
Handrails nominal width of 1200mm when
1350
Handrails nominal width of 1000mm when
1150
Handrails nominal width of 800mm when
Intermediate support distance LA( TK 250 ) ~ 11000
The inclination angle of 30 [deg. , Armrest nominal width 1200mm , and has an intermediate support when
( TK 250 ) ~ 11400
The inclination angle of 30 [deg. , Armrest nominal width 1000mm , and has an intermediate support when
( TK 250 ) ~ 11700
The inclination angle of 30 [deg. , The nominal width of the handrail 800mm , and has an intermediate support when
( TK 370 ) ~ 11000
Tilt angle of 35 [deg.] , Handrails nominal width of 1200mm , and there is an intermediate support when
( TK 370 ) ~ 11400
The inclination angle of 35 [deg. , Armrest nominal width 1000mm , and has an intermediate support when
( TK 370 ) ~ 11700
The inclination angle of 35 [deg. , Armrest nominal width 800mm , and has an intermediate support when
Intermediate support from the LB( TJ 240 ) ~ 11000
The inclination angle of 30 [deg. , Armrest nominal width 1200mm , and has an intermediate support when
( TJ 240 ) ~ 11400
The inclination angle of 30 [deg. , Armrest nominal width 1000mm , and has an intermediate support when
( TJ 240 ) ~ 11700
The inclination angle of 30 [deg. , The nominal width of the handrail 800mm , and has an intermediate support when
( TJ 110 ) ~ 11000
Tilt angle of 35 [deg.] , Handrails nominal width of 1200mm , and there is an intermediate support when
( TJ 110 ) ~ 11400
The inclination angle of 35 [deg. , Armrest nominal width 1000mm , and has an intermediate support when
( TJ 110 ) ~ 11700
The inclination angle of 35 [deg. , Armrest nominal width 800mm , and has an intermediate support when

Remarks:
1. For the models of KS-SB, SBF KS, the handrail nominal width of 800mm is not available.
2. For RA, RB and RC, please contact the related salesmen of Shanghai Mitsubishi.

Related products
Send Message
Inquiry
Inquiry