ZC-300H Corrugated Pipe Extrusion Line
(ID50-OD350mm)
ZC-300H is a complete corrugated pipe production line that adopts pressured water cooling method for mould blocks, which helps increase the production speed while lowering power consumption thereby resulting in a better productivity and lower costs for customers. This corrugated pipe extrusion line is quite suitable for manufacturers who produce cable protection conduits, heating system protecting tubes, drainage pipes and stormwater pipes.
- Min. pipe ID 50mm
- Max. pipe OD 350mm
- Total installation power 375kw
- Normal working power 230kw
- Max. production speed 10.3m/min
- Max. output 720kg/hr
- Overall dimension(L×W×H) 33m×5.2m×3.3m
Our corrugated pipe extrusion line is mainly composed of extruder, corrugator, cooling bath, cutting machine and unloading device (tilting table).
-
- Single Screw Extruder (Model SJPE-75/33B)
- 1 set
-
- Single Screw Extruder (Model SJPE-90/33C)
- 1 set
-
- Pipe Corrugator (Model ZC-300H)
- 1 set
-
- Spray Cooling Bath (Model 300)
- 1 set
-
- Automatic Sawdust-free Cutting Machine (Model 300)
- 1 set
-
- Unloading Device with Weighing System (Model 300)
- 1 set
Single Screw Extruder
- Automatic feeding, alarming when lacking of material;
- The hopper combines functions of drying and storing, automatic temperature control with intelligent display;
- Extruder screw and barrel are hardened for better wear resistance, increased durability and longer life span;
- High-efficiency shield-style screw features a special blends melding section, significantly improving the plasticizing efficiency and output;
- PCC control system, PID temperature control, enabling the temperature to be controlled at the precision of ±1°C;
- Fully automatic running of the entire extrusion line;
Pipe Corrugator, Model ZC-300H
- Utilizing water cooled mould blocks, the speed of pipe corrugator is greatly improved; The maximum speed reaches 10.3m/min;
- High efficiency vacuum system ensures optimal pipe forms;
- Mould block temperature control system assists in further optimizing the quality of corrugated pipes;
- Quick and easy mould changeover, efficiently shortening the downtime;
- Synchronous operation with other equipment such as extruders;
- Moulds are compatible to ZC-600H and ZC-1000H extrusion lines;
Spray Cooling Bath, Model 300
- Haul-off unit is fitted at the end of the cooling tank, ensuring the corrugated pipes are stably conveyed into cutting machine;
- Blow off system is equipped to thoroughly remove the residual water from the surface of corrugated pipes;
Automatic Sawdust-free Cutting Machine, Model 300
- Swarfless cutting, hydraulically-fed cutting knife ensures precise and burr-free cutting of pipes;
- Auxiliary inspection mechanism allows the cutting knife to be precisely positioned;
Pipe Unloading Device (Tilting Table), Model 300
- The height of tilting table is adjustable electrically, providing ease of operation;
- Equipped with automatic pipe weighing system;
