AWM 3640 Fiberglass Braid Silicone Insulated Motor Wire

AWM 3640 Fiberglass Braid Silicone Insulated Motor Wire
Request a Quote

Conductor: Bare copper, tinned copper
Insulator: Silicone rubber
Jacket: Fiber glass braiding with silicone resin coating
Rated temp: 150/180℃
Rated volt: 1100V
Test voltage: 3200V. 1min
Flame test: FT 2

Application
Thanks to the above characters, AWM 3640 fiberglass braid silicone insulated motor wire is used where high flexibility is required and in high temperature conditions. It is therefore a suitable connection cable for home electric appliance, high voltage machines like transformers, generators, motors, traction machines.

Technical Parameters
AWG
NO.
Conductor Insulation thickness Braiding thickness Cable OD Resistance
Ω/KM
Max.
Size Structure OD Nominal OD Nominal Tolerance
mm² No./mm mm mm mm mm mm mm
16 1.31 7/0.49 1.55 1.28 4.11 0.2 4.50 ±0.20 14.6
26/0.254
52/0.18
15 1.65 33/0.254 1.75 1.28 4.31 0.20 4.70 ±0.20 11.3
14 2.08 41/0.254 1.95 1.28 4.51 0.2 4.90 ±0.20 8.96
7/0.62
37/0.26
13 2.63 52/0.254 2.15 1.28 4.71 0.20 5.10 ±0.20 7.10
12 3.31 65/0.254 2.5 1.28 5.06 0.2 5.50 0.30 5.64
43/0.32 -0.20
11 4.17 83/0.254 2.74 1.28 5.3 0.2 5.70 0.30 4.48
34/0.40 -0.20
10 5.261 35/0.45 3.20 1.28 5.76 0.20 6.20 0.30 -0.20 3.55
9 6.631 53/0.40 3.98 1.28 6.54 0.20 7.00 0.30 -0.20 2.81
8 8.367 70/0.40 4.40 1.28 6.96 0.20 7.40 0.30 -0.20 2.30
7 10.55 84/0.40 4.60 1.28 7.16 0.25 7.70 0.30 -0.20 1.79
6 13.30 105/0.40 5.30 1.28 7.86 0.25 8.40 0.30 -0.20 1.42
5 16.77 133/0.40 6.00 1.28 8.56 0.25 9.10 0.30 -0.20 1.12
4 21.15 168/0.40 6.80 1.28 9.36 0.30 10.00 0.30 -0.20 0.89
3 26.67 210/0.40 7.60 1.28 10.16 0.30 10.80 0.40 -0.20 0.707
2 33.62 266/0.40 8.50 1.28 11.06 0.30 11.70 0.40 -0.20 0.56
1 42.41 217/0.50 9.60 1.28 12.16 0.55 13.30 0.40 -0.20 0.449
1/0 53.49 276/0.50 11.2 1.53 14.26 0.55 15.40 0.40 -0.20 0.355
2/0 67.43 342/0.50 12.2 1.53 15.26 0.55 16.40 0.40 -0.20 0.282
3/0 85.01 437/0.50 13.8 1.53 16.86 0.55 18.00 0.40 -0.20 0.223
4/0 107.2 551/0.50 15.5 1.53 18.56 0.65 19.90 0.40 -0.20 0.177
250kcmil 127.0 646/0.50 17.5 1.53 20.56 0.65 21.90 1.0 -0.50 0.151
300kcmil 152.0 779/0.50 19.5 2.24 22.56 0.65 23.90 1.0 -0.50 0.125
350kcmil 177.0 912/0.50 21.0 2.24 24.06 0.65 25.40 1.0 -0.50 0.108
400kcmil 203.0 1036/0.50 23.0 2.24 26.06 0.65 27.40 1.0 -0.50 0.0942

Mechanical Properties
Tensile strength: ≥3.45N/mm²
Elongation at break of insulation: ≥100%
Min. bending radius: 6×OD
Standard: UL758, UL62, UL1581

Characteristics
AWM 3640 fiberglass braid silicone insulated motor wire has very good flexibility and good performance of resistance to high temperature, range from -55℃ up to 180℃.
The use of silicone rubber, a high grade corona resistant insulation material, gives the cable excellent dielectric strength.
The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechanical protection by maintaining good flexibility.
The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.
In the event of fire, no corrosive and toxic gases will be given off.
Hence, damage caused by fire can be kept to minimum.

Form
Related products
Send Message
Inquiry
Inquiry