Regenerative Magnesium Melting Furnaces-Gas Fired

Regenerative Magnesium Melting Furnaces-Gas Fired
Request a Quote
Heating and Melting Equipment
Gas fired magnesium melting furnace
  • A3 steel plate and profile steel is used for the casing of the furnace.
  • The insulation layer is composed of high-quality Nano-plate, insulation material and calcium silicate board, which are laid in the outer enclosure.
  • The furnace lining is made from heat-resistant insulation brick.
  • German KromSchroder burner.
  • Liquid leakage alarm with an electrode connected to the alarm system of the electric furnace control cabinet. Furnace will shut down if the alarm is triggered.
  • The protective-gas system should be turned on until the temperature of the molten magnesium drops below 350 degrees. The crucible should not be lifted out for maintenance until the molten magnesium is cooled to a solid state naturally.
  • The height of the furnace can be customized according to your production needs and factory layout.
Thermal energy storage devices
  • 6mm thick welded 304 stainless steel plate and stainless steel pipe.
  • Heat energy is recovered instead of exhausted into the air to heat the crucible. This saves energy by 15-20%
  • Effectively reduces the ambient temperature of the production plant.
Crucible
  • The crucible is made of bimetal composite material with a total thickness of 25mm or 31mm.
  • The outer layer is made of imported high-quality heat-resistant 310S stainless steel plate with a thickness of 3mm, and the inside is made of Q345R stainless steel plate with a thickness of 22mm or 28mm, to ensure the overall strength of the crucible.
  • The two ends of the crucible are mechanically bended forming a seamless shape, ensuring the crucible can be rotated and heated evenly.
  • The crucible is easy to maintain and replace if needed. Its average service life is more than 2 years.
  • The whole crucible is coated with boron nitride for protection.
  • The crucible is made of two separated chambers, a melting chamber and a holding chamber to ensure the purity of molten magnesium.
  • The gas is evenly distributed in the crucible.
  • The cover and the crucible are locked by stainless steel screws, which are resistant to high temperature, not easily deformed, and easy to disassemble. Insulation material and high temperature rope are pressed in the middle to effectively prevent air leakage.
Parameters
Model HX-500 HX-800 HX-1000
Model of adaptive die-casting machine 400T-500T 630T-800T 800T-1000T
Furnace dimensions 3941 * 1909 * 1203 4986 * 2092 * 1860 5341 * 2092 * 1860
Crucible capacity 500kg 800kg 1000kg
Crucible material 310S+Q345R 310S+Q345R 310S+Q345R
Crucible thickness 3mm+22mm=25mm 3mm+22mm=25mm 3mm+28mm=31mm
Crucible structure double chamber, double pump double chamber, double pump double chamber, double pump
Max. Melting rate 160kg/h -180kg/h 260kg/h -280kg/h 330kg/h -350kg/h
Power supply AC380V (customizable) AC380V (customizable) AC380V (customizable)
Burner system power 300,000kcal 400,000kcal 500,000kcal
Vent fans power 4.5KW 5.5KW 5.5KW
Heat recovery from exhaust gas continuous heat transfer system continuous heat transfer system continuous heat transfer system
Flue gas temperature ≥250℃ ≥250℃ ≥250℃
Temperature rise in the external surface of melt <40℃ <40℃ <40℃
Max. Allowable temperature of magnesium liquid 720℃ 720℃ 720℃
Melting loss of magnesium melt <1.2% <1.2% <1.2%
Energy consumption per ton of magnesium fuel gas: 80~85m3/ton fuel gas: 80~85m3/ton fuel gas: 80~85m3/ton
Temperature control precision of magnesium liquid in pouring ladle ±3℃ ±3℃ ±3℃
Furnace noise factor <80 dB <80 dB <80 dB
Furnace overheat protection furnace temperature≦900℃, magnesium liquid ≦720℃ furnace temperature≦900℃, magnesium liquid ≦720℃ furnace temperature≦900℃, magnesium liquid ≦720℃
Heating power of depositing <3.0 kW <3.0 kW <3.0 kW
Proportioning range 0.05~5kg 0.05~10kg 0.05~15kg
Starting temperature of automatic gas supply 350 ℃ (adjustable) 350 ℃ (adjustable) 350 ℃ (adjustable)
Airflow 3~15 l/m (adjustable) 3~20 l/m (adjustable) 3~25 l/m (adjustable)
Protective gas SF6/R134a+N2 SF6/R134a+N2 SF6/R134a+N2
Gas supply accuracy ±1‰ ±1‰ ±1‰
Drive mode gear motor gear motor gear motor
Preheating mode up and down radiant heating up and down radiant heating up and down radiant heating
Max. Electric power 28 kW 28 kW 28 kW
Feeding mode of magnesium ingot by manipulator by manipulator by manipulator
Related products
Send Message
Inquiry
Inquiry