AMP 600 Fire Resistant High Temperature Electric Wire

AMP 600 Fire Resistant High Temperature Electric Wire
AMP 600 Fire Resistant High Temperature Electric Wire
Request a Quote

Conductor: Nickel coated copper, pure nickel
Insulator: Mica taped
Jacket: Glass fiber braiding
High temperature resin coating
Rated temp.: 450℃
Peak temp: 500℃
Rated voltage: 600V
Test voltage: 2000V. 1min

Application
AMP 600 fire resistant high temperature electric wire is used for internal wire connection of high temperature environment of electric appliance like water heater, oven, furnace and aviation, military, etc.

Technical Parameters
Size Conductor Insulation thickness Braid thickness Wire OD Resistance
AWG Section Structure OD Nominal OD Nominal Tolerance Ω/KM
NO. mm² No/mm mm mm mm mm mm mm Max.
26 0.128 7/0.16 0.48 0.65 1.78 0.18 2.15 ±0.20 148
24 0.205 7/0.20 0.60 0.65 1.90 0.18 2.30 ±0.20 93
22 0.324 7/0.254 0.76 0.65 2.06 0.18 2.45 ±0.20 55
20 0.519 10/0.26 0.96 0.65 2.26 0.18 2.65 ±0.25 34.6
18 0.803 16/0.26 1.20 0.65 2.50 0.18 2.90 ±0.25 23.2
16 1.31 26/0.26 1.50 0.65 2.80 0.18 3.20 ±0.25 14.6
14 2.08 41/0.26 1.90 0.65 3.20 0.18 3.60 ±0.30 8.96
12 3.31 65/0.26 2.40 0.65 3.70 0.18 4.10 ±0.30 5.64
47/0.30
10 5.26 100/0.26 3.20 0.76 4.72 0.38 5.50 ±0.30 3.55
75/0.30
8 8.367 158/0.26 4.40 0.76 5.92 0.38 6.70 ±0.40 2.30
119/0.30
7 10.55 199/0.26 4.60 0.76 6.12 0.38 6.90 ±0.40 1.79
150/0.30
6 13.30 250/0.26 5.30 0.76 6.82 0.38 7.60 ±0.40 1.42
189/0.30
5 16.77 238/0.30 6.00 0.76 7.52 0.38 8.30 ±0.50 1.12
133/0.40
4 21.15 300/0.30 6.80 0.76 8.32 0.38 9.10 ±0.50 0.89
168/0.40
3 26.67 378/0.30 7.60 0.90 9.40 0.51 10.4 ±0.50 0.707
210/0.40
2 33.62 476/0.30 8.50 0.90 10.3 0.51 11.3 ±0.60 0.56
266/0.40
1 42.41 600/0.30 9.60 0.90 11.4 0.51 12.4 ±0.60 0.449
342/0.40
1/0 53.49 426/0.40 11.2 0.90 13.0 0.51 14.0 ±0.60 0.355
276/0.50
2/0 67.53 538/0.40 12.2 0.90 14.0 0.51 15.0 ±0.80 0.282
342/0.50
3/0 85.01 684/0.40 13.8 0.90 15.6 0.51 16.6 ±0.80 0.223
437/0.50
4/0 107.2 855/0.40 15.5 0.90 17.3 0.51 18.3 ±0.80 0.177
551/0.50
250kcmil 127 646/0.50 16.8 1.02 18.84 0.51 19.9 ±1.0 0.151
300kcmil 152 779/0.50 18.5 1.02 20.54 0.51 21.6 ±1.0 0.125
350kcmil 177 912/0.50 20.0 1.02 22.04 0.51 23.1 ±1.0 0.108
400kcmil 203 1036/0.50 21.5 1.02 23.54 0.51 24.6 ±1.0 0.0942
450kcmil 228 1184/0.50 22.8 1.02 24.84 0.51 25.9 ±1.0 0.0838
500kcmil 253 1295/0.50 23.9 1.02 25.94 0.51 27.0 ±1.0 0.0755

Standards
Flame retardant acc. to IEC 60332-1
No flame propagation acc. to IEC 60332-3
Low smoke emission acc. to IEC 61034
Corrosiveness of combustion gases acc. to IEC 6054-2
Halogen free acc. to IEC 60754-1
Meet with RoHS, REACH rules.

Characteristics
AMP 600 fire resistant high temperature electric wire is made of Mica tape as the insulation, by wrapping the tape on the conductor, then fiber glass yarn braiding layer on the Mica tape, PTFE or special resin coating on the jacket. This kind of cable can bear the temperature of 500C deg.
The use of Mica tape, extra high temperature resistant insulation material, gives the AMP 600 fire resistant high temperature electric wire excellent heat resistant and good dielectric strength.
The braided synthetic yarn covering, which is applied directly over the insulation, gives the cable, because of its short braiding pitch and high compactness, an excellent mechanical protection by maintaining good flexibility.
The varnishing of the braiding results in good antifriction properties, high abrasion resistance and excellent chemical resistance against transformer oil, light fuel oil and most types of cleaning agents.
In the event of fire, no corrosive and toxic gases will be given off.
Hence, damage caused by fire can be kept to minimum.

Form
Related products
Send Message
Inquiry
Inquiry