KL510 Hydraulic Top Hammer Drilling Rig

KL510 Hydraulic Top Hammer Drilling Rig
KL510 Hydraulic Top Hammer Drilling Rig
KL510 Hydraulic Top Hammer Drilling Rig
KL510 Hydraulic Top Hammer Drilling Rig
Request a Quote

The KL510 hydraulic top hammer drilling rig is designed for open pit quarrying and mining projects. It is outfitted with a standard drill rod with a diameter of 45/38 millimeters. It allows for vertical, inclined, and horizontal blast hole drilling with a range of 64-115 millimeters. It has a wide range of applications including excavation, cutting, pipelining, foundation drilling, and open-pit mine drilling.

in cutting excavation, pipelining, foundation and open-pit mine drilling.

Features
Each KL510 drilling rig is equipped with a hydraulic top hammer rock drill(24kW) imported from Europe. With powerful rotary toque, impact power, adequate hole flushing ability, and an advanced control system, it is capable of drilling in complex rock conditions.

The drilling rig is equipped with an efficient screw air compressor which saves energy.

Technical Parameters
Dimensions and weight
Transport dimensions (length*width*height) 10500*2450*3200mm
Weight 16500kg
Articulated drill boom and chassis
Ground clearance 430mm
Frequency modulation angle of track 10° up,10° down
Tramming speed 0-3.5km/h
Climbing capacity 30°
Traction 120kN
Hydraulic rock drill
Model HC95LQ
Impact power 24KW
Impact pressure 180-200bar
Impact frequency 48-57HZ
Impact frequency 955Nm
Maximum rotary pressure 210bar
Maximum rotary speed 150rpm
Shank lubrication Air/oil mist
Fuel consumption of lubrication 15drops/min
Drilling diameter 64-115mm
Drill boom, advancing beam and rod changer
Lifting of drill boom 94°
Swing of drill boom -18°/50°
Lifting of folding boom 120°
Swing angle of Beam -93°/20°;-20°/94°
Carriage inclination 120°
Compensation stroke 1353mm
Stroke of rock drill 4150mm
Maximum propelling force 19KN
Feed Method Motor-roller chain
Depth of economical drilling 25m
Number of rods 6+1
Specification of drill rod T45X3660/T38X3660
Thread lubrication of drill rod Pneumatic lubricating pump
Power unit
Engine cummins QSC8.3-C240-30
Number of cylinders 6
Output power 179KW/2200rpm
Drive type Front-rear output
Hydraulic pump 2×variable displacement piston pump+2×gear pump
Air Compressor Zhejiang Kaishan
Capacity of air compressor 8.5m³/min
Air pressure 10bar
Fuel tank 340L
Control system
Travelling Hydraulic pilot
Drill boom Hydraulic direct control
Rock drilling Pilot control(electric/hydraulic)
Opening control Stepless
Impact control Control of shock pressure
Anti-jamming Electric/hydraulic
Voltage 24V, DC
Hydraulic system
Travelling, drilling Load sensing
Filter fineness 10µm
Cooling capacity Ambient temperature: +50°
Hydraulic oil tank 250L
Dust-collecting system
Capacity of dust collector and vacuum degree 20m³/min; 1000mm water column
Filter element/materia 8/fiber
Filtering area 7m²
Power of hydraulic motor 7.5KW
Cab
Safety cab Meet the requirements of FOPS and ROPS
Indoor noise level Below 85dB(A)
Control function Drilling, travelling, movement of drill boom and rod changer
Seat Adjustable
Air-conditioning Standard temperature
Entertainment Radio+MP3
Related products
Send Message
Inquiry
Inquiry