Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T

Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Automatic Rotary Injection Machine (One Mold for One Pair), EA110Q T/EA112Q T
Request a Quote
Suitable for making TPR/PVC/PUR soles and sandals

This injection moulding machine is used to process different materials, like TPR, PVC and PUR and then produce products out of the materials, including single-colour foam or non-foam soles and slippers. What makes this injection press extraordinary is its ability to hold as many as 12 sets of molds, meaning that 12 pairs of shoes can be produced at a time.

Specifications
Item Unit EA110Q T EA112Q T
Raw materials TPR, PVC, PUR (blowing)
Stations 10 12
Screw diameter mm 75
Maximum injection volume CC 880
Injection pressure MPa 70
Clamping force Tons 60
Yield Pairs/hour 100-200 120-240
Mould space mm 420*350*240
Heating power kW 9
Total power kW 36.5
Dimensions cm 550×260×190 600×300×190
Machine weight Tons 7.5 8
Oil consumption L 700
Other configurations Water cooling system, servo motor and automatic skid system
Optional
  • Water cooling system

  • Energy-saving hydraulic servo control system

  • Mould manipulator

System flow chart
Features
  • Wide template design gives enough space for a dozen of molds;
  • Efficient air blowing system is installed to improve the quality and reduce 30% weight of the goods to be made;
  • Screw rod is made through special techniques, which ensures durability;
  • Block cylinder is designed with special structure, providing heat insulation and leakage resistance performance;
  • PLC control system with industrial human-machine interface (HMI) is easy to use;

    • PLC system

    • PLC

    • HMI interface

  • Apart from these features, this injection moulding machine is equipped with several other parts to ensure the safety of operators and reduce costs. To be specific, the special designs include:

    • Safety sign

    • Safety signSafety door with photoelectric switch

    • Emergency stop button

    • Rotary table anti-lifting switch

  • Servo motor and automatic mould manipulator;

    • Energy-saving servo motor

  • Mold water cooling system is installed to speed up the cooling process, so as to improve production rate

Auxiliary Equipment
  • Cooling tower is installed to lower the temperature of hydraulic oil and raw materials;

  • Crusher is installed to recycle used materials;

  • Vertical mixer blends materials with different colours and turn them into the same colour;

  • Horizontal mixer is installed to mix materials;

  • Air compressor is connected to the injection moulding machine to supply air;

  • Drying system is used to dehydrate air so as to avoid bubbles in finished products and make better foam soles;

Accessories and Components
Parts list
Toolbox / 1pc
Allen key 1.5-10 9 sets
Open-end wrench 6-24 8 sets
Phillips screwdriver (small) / 2pcs
Phillips screwdriver (large) / 1pc
Adjustable wrench 250mm 1pc
Heating ring Ø120*80 mm 2pcs
Heating ring Ø70*50 mm 1pc
Heating rod Ø15.8*100 mm 2pcs
Proximity switch Ø 25*25mm 1pc
Proximity switch Ø 12*12mm 1pc
Thermoelectric coupling K type/5M 2pcs
Oil seal / 2pcs
Plugging rod / 1pc
Plugging bushing / 1pc
Copper gasket / 1pc
Injection nozzle / 1pc
User manual / 1
Installation Videos
Tags
  • shoe soles machine
  • footwear making machine
  • PVC shoes injection moulding machine
Related products
Send Message
Inquiry
Inquiry