Wheel Loader 967H
Wheel Loader 967H 1. The 967H Wheel Loader is equipped with ShangChai engine.
2. Its KD switch allows better efficiency and easy operation.
3. This wheel loader employs the famous original GRAZIANO wet type axle with multi-disc limited slip differentials to deliver maximum traction under changing traction conditions.
4. It is equipped with reliable ZF transmission case and torque converter.
5. The bucket of this wheel loader features automatic leveling ability and its boom comes with position limitation.
6. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.
Technical Specification:

Overall Dimension
1	Length (with bucket on ground)	8280(mm)
2	Width (to the outside of wheels)	2897(mm)
3	Bucket width	3048(mm)
4	Height (to the top of the cab)	3545(mm)
5	Wheel base	3300(mm)
6	Tread	2300(mm)
7	Min. ground clearance	460(mm)
Main Technical Specification
1	Rated load	6000(Kg)
2	Operating weight	18600kg
3	Rated bucket capacity	3.5(m3)
4	Max. breakout force	190KN
5	Max. driving force	180KN
6	Max. dump clearance	3028(mm)
7	Dump reach	1228(mm)
8	Dump angle at any position	45
9	Digging depth(with bucket bottom horizontal)	212(mm)
10	Min. turning radius
	(1) Outside of bucket	6870(mm)
	(2) Outside of front wheel	6258(mm)
11	Pivot angle frame	38+1
12	Oscillating angle of rear axle	+12
13	Lifting time of bucket	5.8(sec.)
14	Lowering time of bucket	3.2(sec.)
15	Dumping time	1.5(sec.)
16	Traveling speed (Km/h)
	(1)1st gear (forward & reverse)	6.8
	(2)2nd gear (forward & reverse)	12.2
	(3)3rd gear (forward & reverse)	24.5
	(4)4th gear (forward)	35
Diesel Engine
1	Model	ShangChai SC11CB240.1G2B1
2	Type	Direct injection. Turbocharged. Water cooling
3	Rated output	177(KW)
4	Inter-bore of cylinder / stroke	121/152(mm)
5	Total exhaust of cylinder	10.5(L)
6	Model of starter motor	4N3181
7	Power of starting motor	7.5(KW)
8	Voltage of starting motor	24(V)
9	Rated speed	2200(r/min.)
10	Max. torque	912(N.m)/1400RPM
11	Starting mode	Electric
12	Min. specific fuel consumption	238(g/Kw.h)
13	Specific oil consumption of engine	0.95-1.77(g/Kw.h)
14	Net weight	960(Kg)
Transmission System
1. Torque Converter
1	Type	3-element. Single stage
2	Torque ratio	2.55
3	Max. diameter of flow path	340(mm)
4	Cooling type	Pressure oil circulating
2. Gear Box
1	Model	ZF4WG200
2	Type	Power shift, constant-mesh spur gear
3	Gear shift position	4 forward and 3 reverse gears
3. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	5.111
3	Type of final reducer	Single stage planetary
4	Gear ratio of final reducer	5.167
5	Total ratios	26.409
6	Size of tire	23.5-25 -16PR (L-3)
Working Device Hydraulic System
1	Model of oil pump	P257-G80367ZCA6 / P124-G20NIG
2	System pressure	20(MPa)
3	Model of distribution valve	7130-B97 (HUSCO)
4	Model of pilot valve	406-1400-1145 (HUSCO)
5	(DL) Dimension of lifting cylinder	16090801(mm)
6	(DL) Dimension of tilt cylinder	210110494(mm)
Steering System
1	Type	Middle articulated frame. Full-Hydraulic steering
2	Model of steering pump	P257-G80467HCX6 / G40LIG
3	System pressure	16MPa
4	Dimension of steering cylinder	10050425(mm)
5	Model of redirector	BZZ3-100
Brake System
1	Type of traveling brake	Wet type multi-disc brake Dual chamber dual piping air over oil brake
2	Air pressure	7-8(kgf/cm2)
3	Brake pressure	80(kgf/cm2)
4	Type of emergency brake	Automatic cutting-off air brake
5	Type of parking brake	Drum brake Manual control cutting-off air brake
Oil Capacity
1	Fuel(diesel)	350(L)
2	Engine lubricating oil	19(L)
3	Brake System	21.5(L)
4	Oil for converter and gear box	45(L)
5	Oil for hydraulic system	250(L)
6	Oil for driving axles (F/R)	70(L)+57(L)

Changlin Construction Machinery (Engineering Vehicle/ construction equipment), High Quality!!