Wheel Loader 957H
Wheel Loader 957H 1. The 957H Wheel Loader is equipped with reliable ShangChai SC11CB220G2B1 engine.
2. This Wheel loader adopts 3 forward and 3 reverse power shift transmission.
3. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.
Technical Specification:

Overall Dimension
1	Length (with bucket on ground)	8130(mm)
2	Width (to the outside of wheels)	2800(mm)
3	Bucket width	2946(mm)
4	Height (to the top of the cab)	3450(mm)
5	Wheel base	3200(mm)
6	Tread	2200(mm)
7	Min. ground clearance	450(mm)
Main Technical Specification
1	Rated load	5000(Kg)
2	Operating weight	16700KG
3	Rated bucket capacity	3.0(m3)
4	Max. breakout force	160kN
5	Max. traction force	150kN
6	Max. dump clearance	3100(mm)
7	Dump reach	1150(mm)
8	Dump angle at any position	450
9	Digging depth (with bucket bottom horizontal)	165(mm)
10	Min. turning radius
	(1) Outside of bucket	6735(mm)
	(2) Outside of front wheel	6098(mm)
11	Pivot angle frame	38
12	Oscillating angle of rear axle	+13
13	Lifting time of bucket	5.6(sec.)
14	Lowering time of bucket	3.7(sec.)
15	Dumping time	1.7(sec.)
16	Traveling speed (Km/h), 3 forward and 3 reverse
	(1) 1st gear	7.05/9.0
	(2) 2nd gear	11.7/16.0
	(3) 3rd gear	34.6/38.24
Diesel Engine
1	Model	ShangChai SC11CB220G2B1 Engine
2	Type	Direct injection. Turbocharged. Water cooling
3	Rated output	162(Kw)
4	Inter-bore of cylinder / stroke	121/152(mm)
5	Total exhaust of cylinder	10.5(L)
6	Model of starting motor	KB-24V
7	Power of starting motor	7.5(KW)
8	Voltage of starting motor	24(V)
9	Rated speed	2200(r/min.)
10	Max. torque	8436%(N.m)/(1400r/min)
11	Starting mode	Electric
12	Min. specific fuel consumption	230(g/Kw.h)
13	Specific oil consumption of engine	0.95-1.77(g/Kw.h)
14	Net weight	960(Kg)
Transmission System
1. Torque Converter
1	Model	957H.2
2	Type	3-elements. Single stage
3	Torque ratio	3.35
4	Cooling type	Pressure oil circulating
2. Transmission Case
1	Model	CHANGLIN 957H.4
2	Type	Power shift, constant- mesh spur gear
3	Gear shift position	3 forward and 3 reverse gears
3. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	4.625
3	Type of final reduce	Single stage planetary
4	Gear ratio of final reducer	4.9286
5	Gear ratio	22.795
6	Max. drawing force	150kN
7	Size of tire	23.5-25-16PR
Working Device Hydraulic System
1	Model of oil pump	JHP 3160
2	System pressure	180(kgf/cm2)
3	Model of multi-way directional valve	7130-B97 (HUSCO)
4	Pilot supply valve	DGf-00 (Gaoyu)
5	Pilot valve	406-1044-1145 (HUSCO)
6	(DL) Dimension of lifting cylinder	16090810(mm)
7	(DL) Dimension of tilt cylinder	18090528(mm)
Steering System
1	Type	Middle articulated frame. Full-Hydraulic steering
2	Model of steering pump	JHP2080S
3	Model of redirector	TLF1-E1000B+FKB6020
4	Model of priority valve	YXL-F250F-N7
5	System pressure	16MPa
6	Dimension of steering cylinder	9045435(mm)
Brake System
1	Type of traveling brake	Caliper disc brake Dual pipelines, air over oil activate 4 wheel brake
2	Air pressure	7-8(kgf/cm2)
3	Type of emergency brake	Manual control cutting-off air brake
4	Type of parking brake	Inner expand hoof Automatic boosting. inner expand hoof
Oil Capacity
1	Fuel(diesel)	250(L)
2	Engine lubricating oil	Cummins: 20(L) ShangChai: 42(L)
3	Oil for converter and gear box	42(L)
4	Oil for hydraulic system	180(L)
5	Oil for driving axles (F/R)	20/20(L)

Changlin Construction Machinery (Engineering Vehicle/ construction equipment), High Quality!!