Wheel Loader 947H
Wheel Loader 947H 1. The 947H Wheel Loader is equipped with Dongfeng Cummins Engine.
2. The luxury cabin decoration and A/C of this wheel loader provide operator comfort.
3. This Wheel loader adopts 2 forward and 1 reverse power shift transmission.
4. The combined seal cylinder adopted by this wheel loader obtains high seal performance and more reliability.
Technical Specification:

Overall Dimension
1	Length (with bucket on ground)	7248(mm)
2	Width (to the outside of wheels)	2570(mm)
3	Bucket width	2685(mm)
4	Height (to the top of the cab)	3430(mm)
5	Wheel base	3080(mm)
6	Tread	2050(mm)
7	Min. ground clearance	400(mm)
Main Technical Specification
1	Rated load	4000(Kg)
2	Operating weight	13200KG
3	Rated bucket capacity	2.3(m3)
4	Max. breakout force	134kN
5	Max. dump clearance	2815(mm)
6	Dump reach	1050(mm)
7	Dump angle at any position	45
8	Digging depth (with bucket bottom horizontal)	190(mm)
9	Max. turning radius
	(1) Outside of bucket	6300(mm)
	(2) Outside of rear wheel	5730(mm)
10	Pivot angle frame	38+1
11	Oscillating angle of rear axle	+11
12	Lifting time of bucket	6.2(sec.)
13	Lowering time of bucket	3.8(sec.)
14	Dumping time	1.8(sec.)
15	Traveling speed (Km/h), 2 forward and 1 reverse
	(1) 1st gear forward	11
	(2) 2nd gear forward	36
	(3) 1st gear reverse	15
Diesel Engine
1	Model	Dongfeng Cummins engine 6BTA5.9-C175
2	Type	Direct injection. Turbocharged. Water cooling
3	Rated output	129(kW)
4	Inter-bore of cylinder / stroke	102120(mm)
5	Total exhaust of cylinder	5.9(L)
6	Current of Alternator	70(A)
7	Power of starting motor	6(KW)
8	Voltage of starting motor	24(V)
9	Rated speed	2100(r/min)
10	Max. torque	680(N.M)/1500rpm
11	Starting mode	Electric
12	Min. specific fuel consumption	206(g/Kw.h)
13	Specific oil consumption of engine	0.9-1.6(g/Kw.h)
14	Net weight	452(kg)
Transmission System
1. Torque Converter
1	Model	YJHSW315
2	Type	4-elements. Double stage
3	Torque ratio	4
4	Cooling type	Pressure oil circulating
2. Transmission Case
1	Model	Z40-3000
2	Type	power shift, constant-mesh spur gear
3	Gear shift position	2 forward and 1 reverse gears
3. Axle and Tire
1	Type of main reducer	Spiral bevel gear, single stage
2	Gear ratio of main reducer	5.286
3	Type of final reducer	Single stage planetary
4	Gear ratio of final reducer	4.4
5	Total ratios	23.258
6	Max. drawing force	120kN
7	Size of tire	20.5-25-16PR
Working Device Hydraulic System
1	Model of oil pump	CBGj 3140
2	System pressure	180(kgf/cm2)
3	Model of multi-way directional valve	D32II
4	Pilot valve	DJS2-UX/UU
5	(DL) Dimension of lifting cylinder	15080695(mm)
6	(DL) Dimension of tilt cylinder	18090468(mm)
Steering System
1	Type	Middle articulated frame. Full-Hydraulic flow amp. Steering
2	Model of steering pump	CBGj 2063 / 1016-XF
3	Model of redirector	BZZ1-E630C+FKA-146020
4	Model of distribution valve	FLD-F48H
5	System pressure	14MPa
6	Dimension of steering cylinder	7040460(mm)
Brake System
1	Type of traveling brake	Air over oil activate 4 wheel brake with caliper disc brake
2	Air pressure	7-8(kgf/cm2)
3	Type of emergency brake	Automatic cutting air brake
4	Type of parking brake	Drum brake Manual control cutting-off air brake
Oil Capacity
1	Fuel (diesel)	200(L)
2	Engine lubricating oil	13.5(L)
3	Oil for converter and gear box	45(L)
4	Oil for hydraulic system	150(L)
5	Oil for driving axles (F/R)	20/20(L)
6	Oil for brake	21.5(L)

Changlin Construction Machinery (Engineering Vehicle/ construction equipment), High Quality!!