Waterproof LED Strip Light IP65 (Silicone Cover)


Technical advantages
1. The base of the waterproof LED strip light is flat and flexible on one axis, so the LED light can be created into variety of shapes.
2. Featuring small size and low voltage operation, the LED flexible strip is ideal for a wide range of applications.
3. With the same power, the LED strip is typically twice as bright as LED rope light.
4. The waterproof LED strip light can be cut off at marked intervals by electricians and rejoined by soldering or using our quick connectors at marked soldering points.
5. Comes with a self-adhesive 3M backing that allows quick and easy installation on any dry, smooth surface.

Note
Always install according to local electrical codes requirements.

Why choose it?
1. Super length. Rayconn waterproof LED strip light IP65 comes with a maximum length of 5m.
2. IP65, silicon tube coating.
3. Constant current IC is adopted to ensure excellent light color consistence.
4. Flexible PCB and 24V low voltage input
5. Every 6 LEDs is linear separable, so the length of the waterproof LED strip light is customizable.
6. Available in full spectrum colors.
7. This LED lighting fixture is totally environmental friendly, as it generates no UV and IR.
8. Extremely long lifespan and low power consumption.

Basic technical data
Light source: 5050 3-IN-1 Top SMD LEDs
Flexible PCB thickness: 0.25mm
Flexible PCB width:14mm
Height of the strip: 4mm
Entire roll length: 5m
Number of LEDs: 15LEDs as a basic unit. Each basic unit equals to 0.5m LED strip light.
Beam angle: 120 deg.
Certification: CE & RoHS
Color for choice: RGB
Protective rating: IP65

International market
Germany, UK, Spain, France, Italy, Austria, Switzerland, Belgium, The Netherlands, Greece, Sweden, Norway, Denmark, Portugal, United States, Canada, Australia, Brazil, South Africa, etc.

Safety and maintenance information
1. The installation of Rayconn waterproof LED strip light should be conducted by qualified technicians, and specific electrical and safety standards need to be followed.
2. All applicable electrical and safety standards should be considered while installing the LED strip or related parts like power supply, LED controller, etc.
3. While installing, attention should be paid to standard ESD precautions. It is advised to use a wrist strap during soldering to remove any static electricity. Static electricity may damage the LEDs and other flex LED strip light components.
4. The conducting paths on the flexible PC board should not be damaged during assembly. The LED light strip and all light components should not be mechanically stressed. The strip may be curved around small radii provided there are no LED components on the bend and the force does not crease the light strip. The strip should be secured down immediately to avoid fatigue and breakage.
5. The flexible LED ribbon should be connected to proper power supply.
6. During installation, please make sure the polarity id correct. Electrical polarity is printed on the LED strip and wrong polarity connection may cause damages to the LED light.
7. The LED strip can be cut to different lengths to meet different installation demands. While cutting, please cut according to the cutting marks printed on the strip light.
8. Soldering connection should only be performed on designated solder pads on the flexible LED strip light. During soldering, do not exceed the maximum soldering temperature of 260 Celsius degrees and the maximum soldering time of 10 seconds.
9. When mounting on metallic or other conductive surfaces, there should be an electrical isolation point between the strip and the mounting surface.
10. Flex LED strip light should be installed in proper environment. It’s the user’s responsibility to provide the LED ribbon with suitable protection against corrosive agents, such as moisture and condensation and other harmful elements.