Walk-Behind Vibrating Roller

Our walk-behind vibrating roller is extensively used in earthworks, granular and asphalt construction. It has working widths of 600mm to 750mm, and its operating weight is in the range of 600 to 1000 kg.

Designed with low lateral projection, double vibration system and low center of gravity, our walk-behind vibrating roller is particularly suitable for the construction and maintenance of footpaths, road shoulders, cycle paths, parking areas and garage driveways, playgrounds, commercial and forestry roads.

Operating Guidance of Walk-Behind Vibrating Roller
1. The walk-behind vibrating roller is driven by combustion engine. So when the machine starts to vibrate, the combustion engine should operate in intermediate speed first, then high speed. It should be particularly pointed out here that the vibrating roller must move for a while before it vibrates.
2. The machine must be power off before speed or direction is changed. The speed of combustion engine should be lowered while speed changes.
3. Vibration of vibrating roller on firm earth is forbidden.
4. When works on soft ground, the walk-behind vibrating roller should do rolling work once or twice, and then vibrate.
5. Frequency of vibration should be adjusted well before use.
6. After main clutch is released, reversing clutch and brake can be adjusted.
7. High gear is not allowed to use when the walk-behind vibrating roller is climbing up, going downhill or taking a sudden turn.
8. Vibration is forbidden when the machine runs in high speed.
9. Before the machine is shutdown, you stop the vibration first, then put reverse mechanism into middle position, and put speed changer into neutral position. After doing those, you pull up manual operating lever and then turn off the machine.
10. Other operations must meet the requirements of vibrating rollers.

Technical Parameters of SWW08DB Walk-behind Vibrating Roller

Engine
Model	CF186F
Type	Vertical, air-cooled, direct injection
Rated power	5.68Kw
Rated speed	2600rpm
Main technical specification
Operating weight	780kg
Front static linear load	46N/cm
Rear static linear load	73N/cm
Vibrating frequency	48Hz
Vibrating amplitude	0.25mm
Centrifugal force	12Kn
Vibrating drum width	600mm
Vibrating drum diameter	405mm
Vibrating drum rim thickness	12mm
Traveling speed	2.5km/h
Grade-ability	40%
Turning radius	2700mm
Steering angle	30°
Dimensions
Overall length	2330mm
Overall width	795mm
Overall height	1050mm
Wheel base	6000mm
Service capacities
Fuel tank	5L
Water tank	30L

Sinoway Industrial (Shanghai) Co., Ltd. is a professional walk-behind vibrating roller supplier based in China. Our products include wheel excavators, asphalt mixing plants, crawler cranes, and more. Both construction machinery and engineering machinery can be available in our company.

All our products are high in quality and reliable in performance. They are highly sought after by our customers from all over the world.

In addition, we are located in Shanghai, China’s largest port city. Access to convenient transportation reduces the cost of shipping for our customers, and also saves our own purchasing cost.

For further walk-behind vibrating roller inquiries or purchase, please contact us via email or phone.