Whetstone (2000# / 5000#) T0930W

Model: T0930W

Size: 180*60*27mm

Brief Introduction on the Whetstone
1. The high grade corundum of the whetstone ensures effective sharpening results.
2. Double-sided sharpening design. The 2000 grit side allows the whetstone to have coarse grinding and the 5000 grit side allows for fine grinding.
3. The whetstone is designed with a silica gel anti-slip base which guarantees sharpening safety.

Usage Instructions on the Whetstone
1. Immerse the whetstone in water for 5 minutes before use, and then put it on a steady, flat surface. Complete one or two of the following steps depending on how blunt the knife is:

Step One: 2000 Grit Coarse Grinding
This step is used to repair seriously damaged blades and is suitable for blunt knives.
Hold the knife at an angle of 10 - 30° to the whetstone surface, and then grind the edge on the surface of whetstone back and forth with a gentle pressure, and sharpen it until the edge is sharp enough.
We recommend doing coarse grinding for your knives and tools every six months or as required.

Step Two: 5000 Grit Fine Grinding
This step is necessary to eliminate burrs of the edge. While fine grinding, sharpen the knife using a more gentle pressure as compared with that in Step One.
We recommend using the whetstone for knife fine grinding once a week to keep your blade sharp all the time.

2. Please wipe the knife or tool with wet cloth or rinse it with water after sharpening, and then dry it. Clean the whetstone surface with a soft brush and let it air dry.