ETW,Thin Sheet Slitting Line,China Thin Sheet Slitting Line Manufacture

Thin Sheet Slitting Line

Thin Sheet Slitting Line, Slitting line for thin sheet

Introduction:
This thin sheet slitting line, also called metal coil slitter, is a kind of production line to break down master coils into smaller coils of a particular width. The thin sheet slitting line is made up of coil-loading car, single mandrel uncoiling, coil-end-feeding and shoveling, double roller pinching feeding, three-roller-leveling, end-cutting, strip-aligning, disk shearing, scrap reeling, hole accumulator, pre-separator, tensioning, recoiling ,coil down car, hydraulic control, and electric control.
Because of the thickness of slitting sheet, the coil slitting line can be divided into thin sheet slitting line, middle thick coil slitting line and thick coil slitting line. Among them, the thin sheet slitting line: strip thickness: (0.2~1) mm, (0.3-3) mm or (0.3-1) mm; strip width: 600mm. 1000mm or 1600mm.

Advantages:
1. The thin sheet slitting line is controlled by electrical controls system, a key to increasing yield; while the traditional one is adjusted by operators.
2. Offline setup, push-button slitter tooling lock-up, powered indexing tension rolls, quick-change tooling bars and automatic transmissions are on all DC motors.
3. All kinds of non-ferrous strips can be cut by cutting tools of different materials.

The thin sheet slitting line can be divided into three types, due to the different slitting speed, max. coil weight, strip thickness and max. strip width.

The detail specification as follows:

1. YJ-(0.2～1)×600mm Slitting Line

Material of coils: carbon steel, color steel, galvanized steel and etc

Strip thickness: (0.2~1) mm
Strip width: 600mm
Inner diameter of coils: Φ508mm
Max. Outer diameter of coils: Φ1500mm
Max. Coil weight: 8000kg
Uncoiling mandrel: Ф508
Leveling roller: Φ160
Material of leveling roller: 40Cr
Material of disc cutter: 6CrW2Si
Recoiling spindle: Φ508×750mm
Slitting speed: (0~30) m/min, adjustable

2. YJ-(0.3-1)×1000mm Slitting Line

Material of coils: carbon steel, stainless steel, galvanized plate, colored steel plate
Strip thickness: (0.3-1) mm
Max. Strip width: 1000mm
Inner diameter of coils: ≥Φ450mm
Outer diameter of coils: Φ2000mm
Max. Coil weight: 15000Kg
Uncoiling mandrel: Ф508
Leveling roller: Φ160
Material of leveling roller: 40Cr
Material of disc cutter: 6CrW2Si,
Recoiling shaft: Φ450
Slitting speed: (0-80) m/min, adjustable

3. YJ-(0.3～3)×1600mm Slitting Line

Material of coils: Stainless steel
Strip thickness: (0.3-3) mm
Max. Strip width: 1600mm
Inner diameter of coils: ≥Φ500mm
Outer diameter of coils: Φ2000mm
Max. Coil weight: 20000Kg
Uncoiling mandrel: Ф508
Leveling roller: Φ160
Material of leveling roller: 40Cr
Material of disc cutter: SKD-11
Recoiling shaft: Φ450
Slitting speed: (0~120) m/min, adjustable

Technical Parameters of Thin Sheet Slitting Line:

Strip thickness	Strip width	Max coil’s width	Shearing speed	Area
0.2-1mm	600-1600mm	30T	150m/min	21x11
0.3-3mm	600-1600mm	30T	120m/min	21x11
0.5-4mm	600-1600mm	30T	120m/min	21x11

Who are we

Welcome to our product page of Slitting line .We are a professional Slitting line manufacturer and supplier in China. Here you can find high-quality Slitting line in a competitive price. Also we supply OEM service of Slitting line for you.Our products have established a perfect market in Europe, America, Australia, the Middle East and Africa and all over the world. Welcome for inquiry.

Feedback Form

Other Products

Thick Sheet Slitting Line Introduction: This thick sheet slitting line, also called metal coil slitter, is a kind of production line to break down master coils into smal

12 Hi AGC Cold Rolling Mill Introduction: The 12-Hi AGC cold rolling mill, one of metal coil cold rolling mill, is made from good quality raw material. At the same time

Purlin Profile Roll Forming Machine C Profile Forming Machine, C Purlin Forming Machine ,C Section Forming Machine Specifications C Profile Forming Machine C Purlin Forming Machine

Wall Panel Roll Forming Machine Introduction: 1. The wall panel roll forming machine adopts servo technology to reach the top speeds without compromising measurement accuracy,

Down Pipe Roll Forming Machine Downpipe forming machine,downspout forming machine Introduction:The down pipe roll forming machine is made up of decoiler, roll forming syst