ETW,Thick Sheet Slitting Line,China Thick Sheet Slitting Line Manufacture

Thick Sheet Slitting Line

Introduction:
This thick sheet slitting line, also called metal coil slitter, is a kind of production line to break down master coils into smaller coils of a particular width. The thin coil slitting line is made up of coil-loading car, single mandrel uncoiling, coil-end-feeding and shoveling, double roller pinching feeding, three-roller-leveling, end-cutting, strip-aligning, disk shearing, scrap reeling, hole accumulator, pre-separator, tensioning, recoiling ,coil down car, hydraulic control, and electric control.

Because of the thickness of slitting sheet, the coil slitting line can be divided into thin coil slitting line, middle thick sheet slitting line and thick sheet slitting line. Among them, the thick sheet slitting line: strip thickness: (3~12) mm or (6~20) mm; strip width: 600~2000mm or 600~2200mm.

Advantages:
1. The thin coil slitting line is controlled by electrical controls system, a key to increasing yield; while the traditional one is adjusted by operators.

Thick Sheet Slitting Line

2. Offline setup, push-button slitter tooling lock-up, powered indexing tension rolls, quick-change tooling bars and automatic transmissions are on all DC motors.
3. All kinds of non-ferrous strips can be cut by cutting tools of different materials.
4. We offer tailor-made products, therefore regardless of specification or design we can make according to your requirements.

The thin coil slitting line can be divided into three types, due to the different slitting speed, max. coil weight, strip thickness and max. strip width.

The detail specification as follows:
1. YJ-(3-12)×2000mm Slitting Line
Material of coils: carbon steel, HR and CR etc
Strip thickness: (3~12) mm
Strip width: 600~2000mm
Inner diameter of coils: Φ508mm, Φ610mm, Φ760mm
Max.outer diameter of coils: Φ2000mm
Max.coil weight: 35000kg
Leveling roller: Φ210×2100mm
Material of leveling roller: 40Cr, HRC55°~56°
Material of disc cutter: 6CrW2Si, HRC56°~58°
Recoiling spindle: Φ508×2100mm
Slitting speed: (0~30) m/min, adjustable

2. YJ-(6-20)×2200mm Slitting Line
Material of coils: carbon steel, etc
Strip thickness: (6~20) mm
Strip width: 600~2200mm
Inner diameter of coils: Φ508mm, Φ610mm, Φ760mm
Max.outer diameter of coils: Φ2000mm
Max.coil weight: 40000kg
Leveling roller: Φ210×2100mm
Material of leveling roller: 40Cr, HRC55°~56°
Material of disc cutter: 6CrW2Si, HRC56°~58°
Recoiling spindle: Φ508×2100mm
Slitting speed: (0~30) m/min, adjustable

Technical Parameters of Thick Sheet Slitting Line:

Strip thickness	Strip width		Max coil\'s weight	Shearing speed	Area
3-12mm	900-2000mm		30T	40m/min	38x11
3-14mm	900-2000mm		30T	40m/min	38x11
3-16mm	900-2000mm		40T	30m/min	40x12
5-20mm	900-2000mm	40T		30m/min	40x12

Feedback Form

Other Products

12 Hi AGC Cold Rolling Mill Introduction: The 12-Hi AGC cold rolling mill, one of metal coil cold rolling mill, is made from good quality raw material. At the same time

Purlin Profile Roll Forming Machine C Profile Forming Machine, C Purlin Forming Machine ,C Section Forming Machine Specifications C Profile Forming Machine C Purlin Forming Machine

Wall Panel Roll Forming Machine Introduction: 1. The wall panel roll forming machine adopts servo technology to reach the top speeds without compromising measurement accuracy,

Down Pipe Roll Forming Machine Downpipe forming machine,downspout forming machine Introduction:The down pipe roll forming machine is made up of decoiler, roll forming syst

Cap Ridge Roll Forming Machine cap ridge roll forming machine,Steel Roofing Ridge Cap MachineIntroduction:The cap ridge roll forming machine is to produce angel title saving human