ETW,PCS Wideband Pico Repeater,China PCS Wideband Pico Repeater Manufacture

Product List

Manufacturers

PCS Wideband Pico Repeater

PCS Wideband Pico Repeater

PCS Wideband Pico Repeater
RCTP1G9K1555
RCTPK-15

The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for weak signals reducing drop/off calls; it eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phones. The CDMA pico repeater has power supply and output power indications; with ALC function that provides high reliability and stability and low interference to BTS. The CDMA pico repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification of PCS Wideband Pico Repeater
Uplink

Item	Electric SPEC		Unit
Frequency range	1850-1910MHz	60	MHz
Operating Bandwidth	1850-1910MHz	60	MHz
Maximum Output power		≤15	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥40	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2.0	/
Noise Figure at Max. System Gain		≤7	dB
System Group Delay		≤1	μs
Frequency Stability		≤0.05ppm	Hz

Downlink

Item	Electric SPEC		Unit
Frequency range	1930-1990MHz	/	/
Operating Bandwidth	1930-1990MHz	60	MHz
Maximum Output power		≤15	dBm
ALC		\|Δ\|≤2	dB

Maximum Gain		≥40	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2.0	/
Noise Figure at Max. System Gain		≤7	dB
System Group Delay		≤1	μs
Frequency Stability		≤0.05ppm	Hz

Mechanical Characteristic of PCS Wideband Pico Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC4.75-5.25V, AC 110~240V
Operating Temperature	-10 ℃ ~+50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	15211025( mm)
weight	≤0.7kg

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for PCS Wideband Pico Repeater

LED	Function	Working mode	Failure
RED Light in the middle	Indication for downlink power	The more downlink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, downlink is under autoexcitation.
The red light in the left hand side	Indication for uplink power	The more uplink output power, brighter the LED	Connect with power supply, the LED is bright while there is no conversation, uplink is under autoexcitation.
green light	Indication for power supply	LED on means there is power supply	The power supply is not working normally if the LED light is off.

Shoulder is a specialized PCS wideband Pico repeater manufacturer based in China. We provide a comprehensive range of products, including SAW resonator, crystal resonator, WiFi module, SAW filter, and others.

Feedback Form

Other Products

GSM Selective Band RepeaterGSM Selective Band Repeater RCTG900X2365 RCTGX The GSM selective band repeater is applied specifically in small area indoor DAS system. It provi

DCS Selective Band RepeaterDCS Selective Band Repeater RCTD1G8X2365 RCTDX The DCS selective band repeater is applied specifically in small area indoor DAS system. It pr

PICO Repeater PICO Repeater PICO repeater can wirelessly transmit and magnify the uplink and downlink signals of base station, whic

CDMA Wideband Pico Repeater CDMA Wideband Pico Repeater RCTC800K1555 RCTCK-15 The CDMA wideband pico repeater is applied specifically in smal

CDMA Pico RepeaterCDMA Pico Repeater RCTC800X1555 RCTCX The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for