TVVBPG-TV Elevator Flat Cable (Shielded Pairs with Screen, Video, FiberOptic, Network Wire)

Construction

TVVBPG-TV 300/500V24*0.75+2P*2*0.75+4OPT+2CX75+1CAT5E

Introduction of Elevator Flat Cable
1.Insulation and Sheath: PVC insulation, PVC sheath
2.Shielded Pairs: 0.5mm² soft drawn stranded copperinsulation core, with bare copper braid for85% coverage
3.Coaxial Cable:Impedance 75ohm, Capacitance 56.7 pf/m; Attenuation 21.3dB/100m@10MHz, 5.08dB/100m@50MHz
4.Optical fibre: 62.5/125 A/bAttenuation 3.5 dB/Km@850nm, 1.5 dB/Km@1300nm
5.UTP CAT5e NetworkLine: Frequency 1.0MHZ, characteristic impedance of 100, attenuation of 1.8 ~2.0dB/100m,transfer rate 0.65C.
6. Rated voltage:300/500V
7. Staticflexibility test: 0.3m<L<0.6m
8. Vertical burn test: passed GB/T18380.11-2008, IEC60332-1:2004 tests
9. Product standard: BS EN 50214:2006, GB/T 5023.6-2006

Guide to Using Onitl Elevator Flat Cable
1. The elevatorflat cable is suitable for use in environments where the ambient temperature is between -15 to +40
2. Under thenormal conditions, the temperature of conductor is lower than 70
3.Cables arerecommended forinstallations where the freely suspended length doesn\'t exceed 400m; and the speed of travel doesn\'t exceed 10m/s

Cable Scope

Note: We could design and manufacture the control core, coaxial and network wire, and the number of fiberoptic unitsaccording to customers specific requirements.