All-in-One Amplifier MP9006, MP9012, MP9025, MP9035
All-in-One Amplifier MP9006, MP9012, MP9025, MP9035

FEATURES :
All-in-one public address device combining tuner, MP3 player, pre-amplifier and power amplifier together With USB port, supports running flash disk or portable hard disk Tuning station saving function after power failure 5 MIC inputs with individual volume control 2 Aux line inputs & 1 line output for additional mixer or amplifier link 1 emergency signal input Built-in chime generator with two types of tone Two levels of priority muting function: MIC1>Chime Bass, treble, and master volume control Output short-circuit protection and alarm function 3 types of speaker output: 100V, 70V, 4-16 Ω

SPECIFICATIONS :

Model	MP9006	MP9012	MP9025	MP9035
Rated output	60W	120W	250W	350W
Output adjust rate	From full load to no load, less than 3 dB.
Output mode	4Ω fixed resistance output, 70V, 100V constant voltage output
AUX output	600Ω 0. 8V
Input	MIC 1, 2, 3, 4, 5 with phantom power supply (optional): 600Ω, 2.5 mV
	AUX 1, 2: 10 kΩ , 250 mV unbalance; EMC IN: The 10kΩ, 250 mV
Frequency response	Line: 80Hz~16kHz (± 3dB); MIC: 100Hz~10kHz (± 3dB)
Harmonic distortion	Less than 0.5% at 1kHz, 1/3 rated power
Signal/noise ratio	MIC 1, Mic2, Mic3 and Mic4, Mic5: 70dB
	AUX 1 and AUX2: 75dB
Tone adjust	Bass: ± 12dB at 100Hz
	Treble: ± 12dB at 10kHz
Protection	AC fuse × 1, overload, short-circuit
Mute function	MIC 1 input overlays other inputs (attenuation 0~-30dB)
	CHIME, EMC cover others (except Mic1) inputs (attenuation 0~-30dB)
Built-in music source	Tuner, MP3
Mains source	AC 220~240V / 50 ~ 60Hz
Power consumed	100W	200W	350W	450W
Dimensions (L×W×H)	430×368 ×88mm
Net weight	11.5kg	12.5kg	15.2kg	16kg
Gross weight	13kg	14kg	16.7kg	17.5kg

Specifications are subject to change without notice.