Self Priming JET Pump SCP-1

Performance parameters of self priming jet pumps:
1. Power: 0.5-1hp
2. Suction lift: 7-9m
3. Total head: 42-52m
4. Flow: 40-60 L/min
5. Voltage and frequency: 110V/220V/380V, 50HZ/60HZ

Wherecould we utilize a self priming jet pump?
1. Our self priming jet pumps can be used to supply potable water, or used inbooster systems.
2. Used for small scale irrigations for gardens and farms. To supply or cleanwater for pools, water tanks, wells, ditches, and so on.
3. They are also good choices for cleaning cars and supplying water for hot springs.

Applicationlimit:
1. Suction lift: 6-8m with foot valve
2. Maximum operating pressure: 8 bar.
3. Maximum ambient temperature: +40
4. Liquid temperature: +60
5. Maximum altitude: +1,000m

Designparameters of self priming jet pumps:
1. Pump body: cast iron
2. Impeller: Brass/plastic/"General Electric" Noryl
3. Ejector: Plastic/"General Electric" Noryl
4. Mechanical seals: NBR/Graphite/Ceramic

Electricalmotor parameters:
1. Single phase/three phase voltage
2. Continuous operating under heavy load is possible
3. Enclosure: aluminium/cast iron
4. Shaft: carbon steel/Welded stainless steel/stainless steel
5. Insulation class: B/F
6. Protection: IP44/IP54
7. Speed of rotation: 2,850rpm
8. Thermal protector is available upon request.

Waterpump standards:
IEC60034-1 IEC 335-1
IEC 34-1 ISO 2548

As one of the leading self priming jet pump manufacturerand supplier in China, we can provide wide range of water pumps for differentapplications. Besides self priming jet pumps and self priming centrifugalpumps, we can also provide peripheral pumps, single stage single suctioncentrifugal pumps, slurry pumps, deep well pumps, and booster pumps, to name afew. All these products are CCC, ISO9001 certified. They are commonly used forsupplying water for civil, industrial, irrigation, and more.
Welcome to contact us for more information.