ETW,SH Self Healing Low Voltage Capacitor,China SH Self Healing Low Voltage Capacitor Manufacture

Product List

Manufacturers

SH Self Healing Low Voltage Capacitor

English

Español

Русский

SH Self Healing Low Voltage Capacitor

SHSelf Healing Low Voltage Capacitor

Application
Self healing low voltage capacitor is used in the system of 1200V and belowpower frequency AC electric circuit to improve power factor, reduce thereactive loss and improve the electric quality.
Standards:GB/T12747-2004/IEC60831-1996

Code & Implication
Nos of phases
Rated capacity (KVAR)
Rated voltage (KV)
Dielectric medium (Metalized PPA)
Immersed liquid (S: Wax)
Series code (Shunt capacitor)

Characteristics
The foreign metalized polypropylene film is adoptedto this capacitor, the size become more smaller and the quality is morereliable.
Advanced technology and special design make sure that the capacitor can operateunder high temperature and heavy voltage fluctuation.
Inside provided with self-discharging resistance and pressure releasing device,for safe operation.
Good appearance and easy installation.
Anti-corrosive metallic enclosure, endurable andenvironmental protected material, no pollution.

Main TechnicalParameters
Rated voltage 0.23 ~ 1.2KV, AC
Rated frequency: 50 or 60Hz
Rated capacity: 1 ~ 50KVAR
Capacitance error: -5 ~ +10%
Tangent of dielectric loss angle: < 0.0008
Maxi permissible over voltage: 1.1Un
Maxi permissible over current: 1.3In
Self-discharging characteristics: 50V or below from 2Un after power off within3 minutes
Ambient temperature: -25 ~ 50(if required by user, -40 ~ 50can be designed)
Relative humidity: < 50% at 40,< 90% at 25
Altitude: < 2000m
Ambient conditions: no corrosive gas and steam, no conductive and explosivedust, no severe mechanical vibration.

Main Specification and Overall Dimension

No	Type	Rated Volt.(KV)	Rated Capacity (Kvar)	Rated Freq. (Hz)	Rated Capacity (uF)	Rated current (A)	H (mm)	Outgoing terminal	Weight (Kg)	Drawing No
1	SH0.23-5-1	0.23	5	50	301	21.7	180	M6	2.03	2
2	SH0.23-7.5-1	0.23	7.5	50	452	32.6	220	M8	2.40
3	SH0.23-10-1	0.23	10	50	602	43.5	220	M8	3.95	2
4	SH0.23-15-1	0.23	15	50	903	65.2	270	M10	5.08	3
5	SH0.23-10-3	0.23	10	50	963	25.1	220	M8	3.95	3
6	SH0.23-15-3	0.23	15	50	1203	37.6	270	M8	5.08	3
7	SH0.23-16-3	0.23	16	50	542	40.2	345	M8	50.8	3
8	SH0.23-20-3	0.23	20	50	1203	50.2	345	M8	6.49	3
9	SH0.23-33-1	0.23	9	50	542	313	220	M6+M8	3.90	3
10	SH0.23-43-1	0.23	12	50	722	317.4	220	M6+M8	3.90	33
11	SH0.23-53-1	0.23	15	50	903	321.7	270	M6+M8	5.08	3
12	SH0.23-63-1	0.23	18	50	1084	326	270	M6+M10	6.44	3
13	SH0.4-1-3	0.4	1	50	20	1.4	105	M5	0.95	1
14	SH0.4-3-3	0.4	3	50	60	4.3	105	M5	0.95	1
15	SH0.4-4-3	0.4	4	50	80	5.8	130	M5	1.10	1
16	SH0.4-5-3	0.4	5	50	100	7.2	105	M6	1.25	2
17	SH0.4-6-3	0.4	6	50	119	8.7	105	M6	1.25	2
18	SH0.4-8-3	0.4	8	50	159	11.6	105	M6	1.25	2
19	SH0.4-10-3	0.4	10	50	199	14.4	130	M6	1.35	2
20	SH0.4-12-3	0.4	12	50	239	17.3	180	M6	2.03	2
21	SH0.4-14-3	0.4	14	50	279	20.2	180	M6	2.03	2
22	SH0.4-15-3	0.4	15	50	299	21.7	180	M6	2.03	2
23	SH0.4-16-3	0.4	16	50	319	23.1	180	M6	2.03	2
24	SH0.4-18-3	0.4	18	50	358	26.0	220	M6	2.42	2
25	SH0.4-20-3	0.4	20	50	398	28.9	220	M6	2.42	2
26	SH0.4-25-3	0.4	25	50	497	36.1	220	M8	3.90	3
27	SH0.4-30-3	0.4	30	50	597	43.3	220	M8	3.90	3
28	SH0.4-40-3	0.4	40	50	796	57.7	270	M8	5.07	3
29	SH0.4-50-3	0.4	50	50	995	72.2	345	M8	6.49	3
30	SH0.415-5-3	0.415	5	50	92	7.0	105	M6	1.25	2
31	SH0.415-10-3	0.415	10	50	185	13.9	130	M6	1.35	2
32	SH0.415-12-3	0.415	12	50	222	16.7	180	M6	2.03	2
33	SH0.415-14-3	0.415	14	50	259	19.5	180	M	2.03	2
34	SH0.415-15-3	0.415	15	50	277	20.9	180	M6	2.03	2
35	SH0.415-16-3	0.415	16	50	296	22.3	180	M6	2.03	2
36	SH0.415-18-3	0.415	18	50	333	25.0	220	M6	2.42	2
37	SH0.415-20-3	0.415	20	50	370	27.5	220	M6	2.42	2
38	SH0.415-25-3	0.415	25	50	462	34.8	220	M8	3.90	3
39	SH0.415-30-3	0.415	30	50	555	41.7	220	M8	3.90	3
40	SH0.415-40-3	0.415	40	50	739	55.7	270	M8	3.90	3

Main Specificationand Overall Dimension - Page 2

41	SH0.415-50-3	0.415	50	50	924	69.6	345	M10	6.49	3
42	SH0.45-5-3	0.45	5	50	79	6.4	105	M6	1.43	2
43	SH0.45-10-3	0.45	10	50	157	12.8	130	M6		2
44	SH0.45-15-3	0.45	15	50	236	19.2	180	M6	2.15	2
45	SH0.45-20-3	0.45	20	50	314	25.7	220	M6		2
46	SH0.45-25-3	0.45	25	50	393	32.1	220	M8		3
47	SH0.45-30-3	0.45	30	50	472	38.5	220	M8		3
48	SH0.45-40-3	0.45	40	50	629	51.3	270	M8		3
49	SH0.45-50-3	0.45	50	50	786	64.2	270	M8		3
50	SH0.525-5-3	0.525	5	50	58	5.5	130	M6		2
51	SH0.525-10-3	0.525	10	50	116	11.0	180	M6		2
52	SH0.525-15-3	0.525	15	50	173	16.5	220	M6	2.43	2
53	SH0.525-20-3	0.525	20	50	231	22.0	220	M6	3.84	3
54	SH0.525-25-3	0.525	25	50	289	27.5	220	M8	4.67	3
55	SH0.525-30-3	0.525	30	50	347	33.0	220	M8		3
56	SH0.525-40-3	0.525	40	50	462	44.0	270	M8		3
57	SH0.525-50-3	0.525	50	50	578	50.0	345	M10		3
58	SH0.69-5-3	0.69	5	50	34	4.2	105	M6		2
59	SH0.69-10-3	0.69	10	50	67	8.4	130	M6		2
60	SH0.69-15-3	0.69	15	50	100	12.6	180	M6	2.41	2
61	SH0.69-20-3	0.69	20	50	134	16.7	220	M6		2
62	SH0.69-25-3	0.69	25	50	167	20.9	220	M8		3
63	SH0.69-30-3	0.69	30	50	201	25.1	220	M8		3
64	SH0.69-40-3	0.69	40	50	268	33.5	270	M8		3
65	SH0.69-50-3	0.69	50	50	334	41.9	345	M8		3
66	SH1.14-12-3	1.14	12	50	29.4	6.1	220	M6	2.7	2
67	SH1.14-15-3	1.14	15	50	36.8	7.6	220	M6		2

Main Technical Dataand Out Line Dimensions Data

No.	Type	Rated Volt. (KV)	Rated Capacity (Kvar)	Rated Freq. (Hz)	Rated Capacity (uF)	Rated current (A)	H (mm)	Outgoing terminal	Weight (Kg)	Drawing No
1	SH0.4-3-3	0.4	3	50	60	4.3	105	M6	0.95	4
2	SH0.4-4-3	0.4	4	50	80	5.8	105	M6	1.10	4
3	SH0.4-5-3	0.4	5	50	100	7.2	105	M6	1.25	4
4	SH0.4-6-3	0.4	6	50	119	8.7	105	M6	1.25	4
5	SH0.4-8-3	0.4	8	50	159	11.6	125	M6	1.25	4
6	SH0.4-10-3	0.4	10	50	199	14.4	180	M6	1.35	4
7	SH0.4-12-3	0.4	12	50	239	17.3	180	M6	2.03	4
8	SH0.4-14-3	0.4	14	50	279	20.2	210	M6	2.03	4
9	SH0.4-15-3	0.4	15	50	299	21.7	210	M6	2.03	4
10	SH0.4-16-3	0.4	16	50	319	23.1	210	M6	2.03	4
11	SH0.4-18-3	0.4	18	50	358	26.0	245	M6	2.42	4
12	SH0.4-20-3	0.4	20	50	398	28.9	245	M6	2.42	4
13	SH0.4-25-3	0.4	25	50	497	36.1	210	M8	3.90	5
14	SH0.4-30-3	0.4	30	50	597	43.3	260	M8	3.90	5
15	SH0.4-35-3	0.4	35	50	697	50.4	330	M8	5.07	5
16	SH0.4-40-3	0.4	40	50	796	57.7	330	M8	1.25	5
17	SH0.415-5-3	0.415	5	50	92	7.0	105	M6	1.35	4
18	SH0.415-10-3	0.415	10	50	185	13.9	180	M6	2.03	4
19	SH0.415-12-3	0.415	12	50	222	16.7	180	M6	2.03	4
20	SH0.415-14-3	0.415	14	50	259	19.5	210	M6	2.03	4

21	SH0.415-15-6	0.415	15	50	277	20.9	210	M6	2.03	4
21	SH0.415-15-6	0.415	16	50	277	20.9	210	M6	2.03	4
22	SH0.415-16-3	0.415			296	22.3	210		2.42
23	SH0.415-18-3	0.415	18	50	333	25.0	245	M6	2.42	4
23	SH0.415-20-3	0.415	20	50	370	25.0	245	M6	2.42	4
24	SH0.415-25-3	0.415	25	50	462	27.5	210	M8	3.90	5
25	SH0.415-30-3	0.415	30	50	555	34.8	260	M8	3.90	5
26	SH0.415-40-3	0.415	40	50	739	41.7	330	M8	3.90	5
27	SH0.45-5-3	0.415	5	50	79	55.7	105	M6	1.43	4
28	SH0.45-10-3	0.45	10	50	157	6.4	125	M6		4
29	SH0.45-15-3	0.45	15	50	236	12.8	210	M6	2.15	4
30	SH0.45-20-3	0.45	20	50	314	19.2	210	M6		4
31	SH0.45-25-3	0.45	25	50	393	25.7	245	M8		4
32	SH0.45-30-3	0.45	30	50	472	32.1	210	M8		5
33	SH0.45-40-3	0.45	40	50	629	38.5	260	M8		5
34	SH0.69-5-3	0.45	5	50	34	51.3	105	M6		4
35	SH0.69-10-3	0.69	10	50	67	4.2	180	M6		4
36	SH0.69-15-3	0.69	15	50	100	8.4	210	M6		4
37	SH0.69-20-3	0.69	20	50	134	12.6	245	M6	2.41	4
38	SH0.69-25-3	0.69	25	50	167	16.7	210	M8		5
39	SH0.69-30-3	0.69	30	50	201	20.9	260	M8		5
40	SH0.69-40-3	0.69	40	50	268	25.1	330	M8		5
41	SH1.14-12-3	0.69	12	50	29.4	33.5	210	M6		4
42	SH1.14-15-3	1.14	15	50	36.8	6.1	210	M6	2.7	4
43		1.14				7.6

Feedback Form

Other Products

TF Full Film Type H.V. Power CapacitorTF Full Film Type H.V. Power Capacitor Application Film type H.V. power capacitors are suitable for electric system with voltageabove 1KV to increase

Low Voltage Power CapacitorLow Voltage Power CapacitorMain Characters of Low Voltage Power Capacitor1. High Reliability, the product can endureelectric surge strike more than300

RA-1 Reactive Auto-compensation Power Controller RA-1 Reactive Auto-compensation Power ControllerDescription This series of controllers adopt the high-performance single-chipmicro-computer as the bas

RA-2 Reactive Auto-compensation Power Controller RA-2 Reactive Auto-compensation Power ControllerDescription RA-2 series reactive auto compensating power controller is suitable forself-adjusting capa

PS-1 Single Phase Watt-Hour Meter (Kilowatt Hour Meter) PS-1 Single Phase Watt-Hour Meter (Kilowatt Hour Meter)Single phase watt-hour meter is applicable for single phase active energy measurement. It