SC-C SERIES GENERATOR

Note: Standard reference conditions 27(90F)Air Inlet Temp.152.4m(500ft)A.S.L60% relative humidity. Generating Set under 50 Air Inlet Temp. is available

Standard Specifications
OUTPUT RATINGS
The following 3 phase voltages are available:
50 Hz 415 400 380
240 230 220
60 Hz 460 440 416
266 254 240
Other voltages are available on request.
ENGINE
Cummins heavy duty industrial diesel engine.
Governor
Electronic governing standard on all 1000 series engines at 1500 / 1800 rpm.
Electrical System
24V system with battery charging alternator, axial type starter motor, high capacity maintenance free lead acid starting batteries, battery rack mounted on the generator set baseframe and heavy duty interconnecting cables with terminations.
Engine Filtration System
Sealed paper mesh type dry air filters. Cartridge type fuel filters and full flow lube oil filters. All filters have replaceable elements.
ALTERNATOR
Stamford / Marathon alternators have been carefully selected to match the overload performance of the engine and incorporate the following: Screen protected and drip proof, self exciting, self regulating brushless alternator with fully interconnected damper windings, IC06 cooling system and sealed for life bearings, PMG fitted as standard on BCP 1000 models and above. Other brand alternator are available on request.
Insulation System
The Insulation system is Class H.
All windings are impregnated in either triple dip thermo-setting moisture, oil and acid resisting polyester or vacuum impregnated with a special polyester resin. Heavy coat of anti-tracking varnish for additional protection against moisture or condensation.
Electrical Characteristics
Electrical design in accordance with BS5000-3, VDE0530, NEMA MGI-22/32, IEC34, CSAC22.2-100, and AS1359
Automatic Voltage Regulator
The fully scaled automatic voltage regulator maintains the voltage within the limits of 0.5% (l% on HC 15 frame) from no load to full load including cold to hot variations at any power factor between 0.8 lagging and unity and unity and inclusive of a speed variation of 4.0%. Nominal adjustment is by means of a trimmer incorporated in the AVR.
Radio Interference
Suppression is in line with the provisions of VDE Class G:
CONTROL SYSTEM
Baseframe mounted, control panel of fabricated steel construction with a hinged lockable door. The control panel is isolated from vibration and comprises of the following instrumentation and controls: Oil pressure gauge, water temperature gauge, battery charge ammeter, voltmeter and selector switch, frequency meter and hours counter. A manual start control module and emergency stop button are fitted as standard.
Shutdown Protection Devices with Indicators for:
High coolant temperature, low oil pressure and over speed.
FUEL SYSTEM:
Fuel feed and return lines are fitted between the engine terminated at a bulkhead on the generator baseframe.
COOLING RADIATOR
Radiator and cooling fan complete with protection guards, designed to cool the engine at specified output, in air-on temperatures up to 45(113F) Coolant drain valve and remote filling facility and site gauge are fitted as standard.
MOUNTING ARRANGEMENT
Baseframe/Fuel base tank
The complete generator set is mounted as a whole on a heavy duty fabricated, welded steel baseframe. The baseframe incorporates specially designed lifting eyes for sling operation. 8h running hour capacity fuel base tank is available.
Coupling
The engine and alternator are directly coupled by means of an SAE flange so that there is no possibility of misalignment after prolonged use. The engine flywheel is flexibly coupled to the alternator and a full torsional analysis has been carried out to guarantee no harmful vibration will occur in the assembly.
Anti-Vibration Mounts
Anti-vibration mounts are supplied pre fitted between the engine/alternator combination and the baseframe for generators up to and including BCP880S. AVM\'S will be supplied loose for site installation between the baseframe and floor on all other generator combinations.
Safety Guards
The fan, fan drive and battery charging alternator drive are fully guarded for personnel protection. A stone guard protects the radiator core from accidental damage.
GENERAL ARRANGEMENT
The generator set is designed and constructed for installation in a weatherproof building. Various types of weatherproof and sound attenuated ISO containers are available.
DOCUMENT
A full set of operation and maintenance manuals and circuit wiring diagrams are supplied with each generating set.
FACTORY TESTS
The generator set is load tested before dispatch. All protective devices, control functions are simulated and the generator and its systems checked, proved and then passed for dispatch. A test certificate is provided as standard.
EQUIPMENT FINISH
Primer on all equipment. Final coat to manufactures standard.
QUALITY STANDARDS
The equipment meets the following standards: ISO3046, IEC34-1, ISO8528, AS1359, GB/T2820
PRODUCT WARRANTY
All equipment is guaranteed for a period of 12 months from date of commissioning or 1000h running hour whichever occurs first.
Please see SDEC Warranty Statement for a full specification of terms. Extended warranty terms are available, for details please contact your local SDEC dealer.
Equipment must only be used in accordance with recommended operating practices and subject to any specified load limitations.
MISCELLLANEOUS
Shrink wrapped for export.

Specification and design subject to change without notice.

SCEC Cummins Powered Range
25KVA-215KVA @ 50Hz
Product Reference Specifications

Model name	Engine Type	Prime Power KVA KW		Standby Power KVA KW		Net Weight (KG)	Dimension(mm) L M H				Fuel Consumption L/hr	Soundproof Canopy Model
SD-C20	4BT3.9-G	22	18	24	20	628	1780	715		1150	5.0	K2600/H2600
SD-C30	4BT3.9-G	30	24	33	26	628	1780		715	1150	6.5	K2600/H2600
SD-C40	4BT3.9-G	42	34	46	37	900	1780		715	1150	9.3	K2600/H2600
SD-C50	4BTA3.9-G	50	40	55	44	900	1800		720	1200	12.0	K2600/H2600
SD-C60	4BTA3.9-G	63	50	69	55	900	1800		720	1200	14.0	K2600/H2600
SD-C70	6BT5.9-G	70	55	77	61	920	2000		800	1300	16.0	K3050/H3000
SD-C90	6BT5.9-G	90	75	100	83	950	2000		800	1300	20.0	K3050/H3000
SD-C100	6BTA5.9-G	100	80	110	88	980	2250		830	1350	22.0	K3350/H3200
SD-C110	6BTAA5.9-G	113	90	124	99	1100	2250		830	1350	23.0	K3350/H3200
SD-C125	6BTAA5.9-G	125	100	138	110	1150	2250		830	1350	27.0	K3350/H3200
SD-C140	6CTAA8.3-G	137	110	150	120	1180	2500		860	1350	30.0	K3350/H3200
SD-C160	6CTA8.3-G	160	128	176	140	2200	2500		860	1350	32.0	K3900/H3500
SD-C190	6CTA8.3-G	190	152	209	168	2200	2500		860	1350	39.0	K3900/H3500
SD-C200	6CTAA8.3-G	200	160	220	176	2400	2600		880	1500	41.0	K3900/H3500
SD-C215	6CTAA8.3-G	215	172	236	189	2400	2600		880	1500	45.0	K3900/H3500

20KVA-220KVA @ 60Hz
Product Reference Specifications

Model name	Engine Type	Prime Power KVA KW		Standby Power KVA KW		Net Weight (KG)	Dimension(mm) L M H				Fuel Consumption L/hr	Soundproof Canopy Model
SD-C20/6	4BT3.9-G	22	18	24	20	628	1780	715		1150	5.0	K2600/H2600
SD-C30/6	4BT3.9-G	30	24	33	26	628	1780		715	1150	6.5	K2600/H2600
SD-C45/6	4BT3.9-G	45	36	50	40	900	1780		715	1150	9.3	K2600/H2600
SD-C60/6	4BTA3.9-G	63	50	69	55	900	1800		720	1200	14.0	K2600/H2600
SD-C70/6	6BT5.9-G	70	55	77	61	920	2000		800	1300	15.4	K3050/H3000
SD-C85/6	6BT5.9-G	85	68	94	75	920	2000		800	1300	18.7	K3050/H3000
SD-C100/6	6BT5.9-G	100	80	110	88	920	2000		800	1300	22.0	K3050/H3000
SD-C115/6	6BTAA5.9-G	115	93	138	103	1150	2250		830	1350	27.0	K3350/H3200
SD-C135/6	6BTAA5.9-G	138	100	151	110	1150	2250		830	1350	30.0	K3350/H3200
SD-C165/6	6BTA8.3-G	165	132	182	145	2200	2500		860	1350	39.0	K3900/H3500
SD-C190	6CTAA8.3-G	190	152	209	167	2400	2600		880	1500	40.0	K3900/H3500
SD-C220	6CTAA8.3-G	220	160	242	176	2400	2600		880	1500	45.0	K3900/H3500

SDEC Cummins Powered Range
225-1120KVA @50HZ
Product Reference Specifications

Model name	Engine Type	Prime Power KVA KW		Standby Power KVA KW		Net Weight (KG)	Dimension(mm) L M H				Fuel Consumption L/hr	Soundproof Canopy Model
SD-C225	NTA855-G	225	185	250	200	2900	3100	1000		1540	50	K4920/H4300
SD-C250	NTA855-GA	250	200	275	220	2900	3100		1000	1540	55	K4920/H4300
SD-C280	NTA855-G1A	281	225	309	248	3000	3100		1000	1540	69	K4920/H4300
SD-C313	NTA855-G2	313	250	344	275	3100	3100		1000	1540	69	K4920/H4300
SD-C338	NTA855-G2A	338	270	371	297	3200	3100		1000	1540	76	K4920/H4300
SD-C350	NTA855-G4	350	280	385	308	3200	3100		1000	1540	76	K4920/H4300
SD-C375	NTA855-G7	375	300	413	330	3300	3100		1000	1540	82	K4920/H4600
SD-C375#	KTA19-G2	375	300	413	330	4300	3490		1150	1850	82	K4920/H4600
SD-C450	KTA19-G3	450	360	495	396	4400	3490		1150	1850	100	K5320/H5200
SD-C500	KTA19-G4	500	400	550	440	4500	3490		1150	1850	112	K5320/H5200
SD-C560	KTAA19-G6	563	450	619	495	4800	4850		1900	2650	130	K5800/H5600
SD-C625	KTAA19-G7	625	500	688	550	5000	4400		1760	2300	138	K5800/H5600
SD-C625#	KT38-G	625	500	688	550	8000	4400		1760	2300	148	available
SD-C750	KT38-G2	750	600	825	660	8200	4400		1760	2300	165	available
SD-C875	KT38-G2A	875	700	963	770	8500	4400		1760	2300	200	available
SD-C1000	KT38-G5	1000	800	1100	880	8900	4400		1760	2300	220	available
SD-C1120	KT38-G3	1120	1000	1400	1250	9740	5080		1760	2420	312	available

265-1125KVA @60HZ
Product Reference Specifications

Model name	Engine Type	Prime Power KVA KW		Standby Power KVA KW		Net Weight (KG)	Dimension(mm) L M H			Fuel Consumption L/hr	Soundproof Canopy Model
SD-C265/6	NTA855-G1	265	212	292	233	2900	3100	980	1850	58	K4920/H4300
SD-C310/6	NTA855-G1	313	250	344	275	2900	3100	980	1850	69	K4920/H4300
SD-C340/6	NTA855-G1B	344	275	378	303	3100	3100	980	1850	70	K4920/H4300
SD-C390/6	NTA855-G1B	394	315	483	350	3100	3100	980	1850	76	K4920/H4600
SD-C435/6	KTA19-G2	438	350	481	385	4300	3560	1246	1950	82	K4920/H4600
SD-C510/6	KTA19-G3	513	410	564	451	4400	3560	1246	1950	100	K4920/H4600
SD-C560/6	KTA19-G4	562	450	619	495	4500	3560	1246	1950	112	K5320/H5200
SD-C625/6	KTAA19-G5	625	500	688	550	4700	3760	1246	1950	130	K5320/H5200
SD-C735/6	KTAA19-G6A	738	590	811	649	5000	4400	1769	2300	130	K5800/H5600
SD-C735/6#	KTAA19-G7	738	590	811	649	5000	4400	1769	2300	138	K5800/H5600
SD-C775/6	KT38-G	775	620	853	682	8000	4630	1900	2640	148	available
SD-C875/6	KT38-G2	875	700	963	770	8400	4730	1900	2640	165	available
SD-C1000/6	KTA38-G2A	1000	800	1100	880	8500	4780	1900	2640	200	available
SD-C1125/6	KTA38-G4	1125	1000	1237	1100	8500	4780	1900	2640	215	available