A. Road Sweeper
Road Sweeper

LMT5060TSL Road Sweeper

Features of Road Sweeper LMT5060TSL
1. Our road sweeper adopts the way of suction and sweeping combination, wet dust removal, electro-hydraulic control and hydraulic dumping unloading to clean the road.
2. The fan and other device of this road sweeper are driven by the vice-engine.
3. The structure of four mid-mounted disk brushes and one rear-mounted suction nozzle provides a large sweeping width, high sweeping efficiency, good traffic ability, as well as convenient adjustment and maintenance of sweeper device and nozzle.
4. An automatic clutch is set up on the transmission between the vice-engine and the fan, which can ensure the automatic separation of the vice-engine from the fan when the vice-engine startup or shutdown. This also simplifies the operation, reduces the impact on vice-engine and improves the reliability and service life of vice-engine.
5. The sweeping disk has the protection function and automatic reset function, which can avoid obstacles automatically and return automatically.
6. Three positions of disk brush rotation speed (i.e. HIGH, MID and LOW) are provided for various road conditions to ensure the optimal cleaning effect.

Technical Parameters of Road Sweeper LMT5060TSL

Item	Unit	Parameter
Overall Dimensions (Length Width Height)	mm	570020002445
Chassis Type		NKR77LLLACJAY(Euro )
Drive Mode		4x2
Engine Model		4KH1-TC
Engine Power	kW	96
Vice Engine Model		JX493G3/57
Vice Engine Power		57
Fuel Type		Diesel
Wheelbase/ Axle number	mm	3360/2
Approach/Departure Angle	()	24/15
Maximum Total Weight (full-loaded)	kg	6430
Rated Carrying Weight	Kg	1420
Maximum Running Speed	km/h	100
Sweeping Speed	km/h	3~20
Dustbin Effective Capacity	m3	5
Water Tank Capacity	L	950
Maximum Sweeping Width	m	3
Rated Working Pressure of Hydraulic System	Mpa	14
Suction Nozzle Type		Rear Horseshoe Follow-up Suction Nozzle
Suction Pipe Diameter	mm	200
Maximum Dump Angle	()	481
Space between Nozzle and Ground when working	mm	5~10
Maximum Diameter of Sucked Refuse (Density<2g/cm3)	mm	100
Optional Components		Centralized automatic lubrication system, hydraulic steering gear, auxiliary suction pipe, magnetic device, etc.