Press brake, also known as brake press or brake, is adevice for bending sheet and plate material, and most commonly sheet metal.Press brake can be classified as manual press brake, hydraulic press brake,pneumatic press brake and CNC press brake. In terms of different processingmaterials, there are metal, stainless steel and aluminum press brakes, etc.According to the synchronization methods, hydraulic press brakes can be dividedinto press brakes with torsion spindle synchronization, those withmechanic-hydraulic synchronization and with electro-hydraulic synchronization.As per modes of motion, there are press brakes with upper moving and those withlower moving.

Features
1. It has steel-welded construction, with highstrength and fine rigidity.
2. It is with hydraulic top-drive, which is steady and reliable.
3. The press brake maintains synchronization with steel torsion bar with highprecision.
4. It features electrical control of back gauge and ram\'s stroke, and fineadjustment by hand wheel and numerical display.
5. Deflection compensation unit is installed on the top die. Manual crownedbottom die holder is adopted for the machines above 250 ton.
6. The press brake boast lead limit protection and full machine guarding byinterlocker.

Instructions
1. Operators should strictly abide by safetyoperating rules, and accordingly keep armed with protective articles.
2. Check and ensure that motor, switch, line and grounding are normal and firmbefore starting the press brake. And then, ensure that operating parts andbuttons are all in place.
3. Check the contact ratio and firmness of upper and lower moulds. Ensurepositioning devices meet the requirement for processing.
4. Return to the starting point if the top slide and locating shafts are not atthe original point.
5. Set the machine idly running for 1-2 minutes andtop slide full stroke moving twice or three times. If anything wrong occurs,stop the machine immediately. Eliminate the faults and start operating beforeeverything is normal again.
6. Operation of the machine should be commanded by a single person, with closecooperation between operating workers and feeding and pressing personnel. Thecommander is only allowed to give the signal for starting after all relevantworkers are situated in safe places.
7. Ensure the plate material is pressed firm before bending it to avoidtilting, which may hurt the operators.
8. Power off when shifting and stamping the plate material. Start before themachine has stopped running.
9. No material is allowed to touch the lower mold when changing the opening ofvariable lower mold.
10. There should be no person behind the machine when it is working.
11. Bending plate material alone at one end of the machine is strictlyprohibited.

TechnicalParameters

Note:Customized service is available on request.

We are a Chinese manufacturer of press brakes and has gained the ISO9001:2000 quality system certification. Incompliance with the standard, we have manufactured quality hydraulic ironworkermachine, Mechanical Ironworker Machine and hydraulic punching machines whichhave been CE certified. As our company is located in Shanghai, we have accessto developed water transportation. Besides, in close proximity to Shanghai, wecan deliver hydraulic ironworker machines and mechanical ironworker machines there.Thus, you are enabled to estimate many transport programs and select the bestsolution as per your needs. Advantageous geographic location has been favorablefor exporting our machines to many countries such as the US, India, Singapore,Belgium, Australia, Iran, and more. Thank you for visiting our website. If youneed the machines, please feel free to contact us.