Powder Production Line

1. Ultrasonic Cleaning Machine

Main Applications
Our ultrasonic cleaning machine is widely used for cleaning antibiotic vials and oral liquid bottles in pharmaceutical industry. It can connect with other machines to form linkage production line.

Performances and Features
Speed regulation with frequency converter
Simple structure, easy operation, low maintenance
Ultrasonic rough washing, back-flushing and intensive washing
Dial wheel: bottle entering, track: bottle turning
All the parts contacting clean liquid are made of stainless steel, non-toxic and corrosion-resistant.
The working area is separated from outside through the organic glass cover, preventing external pollution and conforming to the standard of GMP.
Low bottle-washing disrepair rate: less than 1%.

Working Principle of Ultrasonic Cleaning Machine
Firstly, the glass container slides along the declining bottle-entering disc into the net belt conveyor. After being transported to the bottle handling disc, the glass containers are divided into four lines and enter into dial wheel. And the dial wheel separates the containers automatically and pushes them into the turning track, and then carry out the following procedures: circulating water injecting, ultrasonic washing, injection water external washing, compressed air internal flushing, injection water internal flushing, compressed air external and internal flushing. Complete rinsing is achieved after the above procedures are finished. Lastly, the galss container is sent out from washing machine, and enters into drying-sterilization tunnel.

2. Sterilizing and Drying Machine

Main Applications
Our sterilizing and drying machine is suitable for drying and sterilizing of glass containers such as needle bottles, ampoule bottles, oral liquid bottles, and others.

Performances and Features
It features reasonable design, compact structure, and high security performance.
The heating power is 27Kw.
Abrupt power-off will cause no damage to the machine due to the high temperature.
The net conveyor belt for bottle and flank balustrade of verge integrates into one.
Bottle delivery is more reliable due to synchronous working, without clamping, falling or breaking bottle.
The complete monitoring device of each part ensures high safety.

Working Principle
In the consecutive transporting process, the ampoules flushed pass by preheat area, drying area, sterilization area, heat eliminating area, and cooling area. After this process, drying, sterilizing and hot source eliminating will be achieved.

3. Powder Filling and Coppering Machine

Main Applications of Powder Filling and Coppering Machine
This machine of powder production line is ideally suited for powder filling and coppering of the antibiotic bottle in the pharmaceutical and chemical industries. This type of pharmacy equipment can automatically finish a series of process, including bottle arranging and transferring, screw filling, stopper arranging, transferring, sucking and fastening.

Features of Powder Filling and Coppering Machine
Use double head to fill powder continuously with high output.
Separated powder filling by special large diameter screw is precise, and can adapt to meet different filling requirements.
Each screw is suitable to all kinds of filling quantity and two separated filling heads can fill two bottles respectively.
Double-pulsator to filling with servomotor drive screw, rapid and precise.

4. Cap Fastening Machine

Main Applications
This machine is suitable for the cap-fastening and sealing of the antibiotic bottle in the pharmaceutical factory.

Features
Apply light wheel to enter bottle with rapid speed and low bottle broken rate.
Have three-knife flexible rolling and pressing structure
Good looking cap fastening, convenient adjusting

Working Principle of Cap-fastening Machine
After the bottles go through filling and coppering and enter bottle arranging disc, this machine can automatically carry out the following procedures: bottle handling, cap transferring, cap picking, cap fastening and bottle discharging.