Portable Hydraulic Equipment usage instruction

1Put the jack near the tyreto be replaced
2Via the accessory,the powersupply of cigarette ignitor or storage battery may beconnected to the jack.
3Take hold of the control handle and press the switchaccording to your require. UP means rising, DOWN meansfalling.
4Make sure the jack should not be inclining whenpropping up.
5In case the engine becomes very hot after 3 minutes,it should be cooled for a while then it may workcontinually.

Working Principle of Portable Hydraulic Equipment
Water or oil under pressure is commonly used as a source of power for manytypes of presses, riveting machines, capstans, winches, and other machines. Thehydraulic press, or hydrostatic press, was invented by Joseph Bramah and is therefore sometimes called the Bramah press. It consists essentially of two cylinders eachfilled with liquid and each fitted with a piston; the cylinders are connectedby a pipe also filled with the liquid. One cylinder is of small diameter, theother of large diameter. According to Pascals law, pressure exerted on thesmaller piston is transmitted undiminished through the liquid to the surface ofthe larger piston, which is forced upward. Although the pressure (force perunit of area) is the same for both pistons, the total upward force on thelarger piston is as many times greater than the force on the smaller piston asthe area of the larger piston is greater than the area of the smaller piston.If, for example, the smaller piston has an area of 2 sq in. and a force of 100 lb is exerted on it, then the force onthe larger piston having an area of 50 sq in. would be 2,500 lb (10050/2=2,500). However, when thepistons move, the distance the smaller piston travels is proportionatelygreater than the distance the larger piston travels, satisfying the law ofconservation of energy. If the smaller piston moves 25 in., the larger one will only move 1 in. The hydraulic press is used, forexample, to form three-dimensional objects from sheet metal and plastics and tocompress large objects.
The Portable Hydraulic Equipment, also an application of Pascals law, is usedto exert large forces or to lift heavy loads. Like the hydraulic press itconsists essentially of two different-sized pistons contained in cylinders thatare connected by a pipe. When the smaller piston is moved back and forth by ahandle connected to it, it pumps a liquid into the cylinder of the largerpiston, forcing the larger piston to move. In this way a weak force applied tothe smaller piston can raise a heavy load on the larger one. The hydraulicelevator is also an application of Pascals law.