Polyurethane Foam Injecting Machine

Low Pressure Polyurethane Foam InjectingMachine PFM-30

Description
This injecting machine is mainly used to inject rigidor soft polyurethane foam continuously for various thermal insulation purposes.
Features
Being controlled by PLC, this machine offers high accuracy, simpleoperation and convenient maintenance. The alarming relay will give alarms whenpre-setting first injection is finished.
Main TechnicalData
- Main pump motor power: 5.5kW
- Mixing motor power: 0.55kW
- Hydraulic pump motor power: 2.2kW
- Auto glue filling motor power: 1.5kW (two set for two tanks)
- Flux: 5~30kg per minute
- Capacity of the tanks for polyurethane glue: 180kg each, auto filling glues
- PLC automatic control: PLC programmable, automatically heating, injecting,cleaning and blowing; Special PLC system from Chinese domestic which can save99 programs.
- This polyurethane foam injecting machine is equipped piston type countingpump: HJ30-50 (two), adjusting accuracy 0.05%.
- Generating pressure: 8-10MPa (one 0.8 m3 air compressor is equipped by buyer)
- Machine weight: about 800kg
- Dimension: 1370mm x 1350mm x 2250mm

High Pressure Polyurethane Foam Injecting Machine PFM-220

Description
This injecting machine is suitable for continuous injecting rigid or softpolyurethane foam products such as sofa pillow, car seats and furniture, etc.
Features
This machine features PLC control, high accuracy, simple operation andconvenient maintenance. Once pre-setting first injection is finished, thealarming relay will give alarms.
Main TechnicalData
1) Main pump motor power: 15kW x 2
2) Mixing motor power: 0.55kW (installed inside a tank)
3) Hydraulic pump motor power: 2.2kW
4) Flux: 40-400kg per minute
5) Injecting time: 0.1-99.9s
6) Injecting pipe high pressure protected by pressure gauge with electriccontact
7) Filters for Polyol and ISO glues: DN110 self-cleanfilter
8) Hydraulic station: hydraulic tank 20L, integrated with over-flow valve,safety valve, pressure gauge, discharge valve, electromagnetic valve,anti-shock pressure gauge, etc.
9) High pressure mixing head: developed by ourselves, high precision, hydrauliccontrol, L type, self-clean, solvent free, life is more than 300 thousandtimes; Outer diameter of the nozzle: 24mm.
10) Temperature control system for tanks: Equipped with two 2kW heaters;Electronic numeric displayer temperature controller is equipped to keepinvariable temperature needed for glues.
11) Auto-filling devices for two tanks: two self-absorbing pumps, motor power 1.5kWeach.
12) Capacity of the tanks for polyurethane glue: 180 kg each
13) PLC automatic control: PLC programmable; special PLC system from Chinesedomestic which can save 99 programs.
14) This polyurethane foam injecting machine is quipped piston type countingpump: adjusting accuracy 0.05%.
15) Generating pressure: 80-100MPa
16) Suspending arm length 2.5m, rotated in 270, horizontal injecting orvertical injecting.
17) Dimension:
Main body: about 1590 x 1200 x 2400mm
Tanks: 720 x 1550 x 2400mm
18) Weight: about 2500kg

We are a forming machine manufacturer in China, provides superior roll formingmachine, spiral duct forming machine, plasma cutting machine, welding machineand other forming machines.