United Kingdom
United States
Argentina
Brazil
China
France
Germany
Japan
Korea
Russia
Spain
Switzerland
Thailand
UAE
Vietnam
Poland
Italy
Morocco
Malaysia
Portugal
India
Canada
- RSV Low Power Solenoid Valve
- Electric Heating Strip
- Compensation Wire
- Thermocouple Strip
- DFD Solenoid Valve
- Gas and Liquid Solenoid Valve
- Exhaust Solenoid Valve
- Plate Gas and Liquid Solenoid Valve
- Paper Covered Wire
- Hot Dip Galvanized Wire
- Stainless Steel Wire
- Fiberglass Enameled Wire
- Magnet Wire
- Fiberglass Wrapped Wire
- Copper Clad Aluminum Busbar, CCA Busbar
- Copper Clad Aluminum Wire, CCA Wire
- Metal Tape
- Resistance Heating Wire
- Mineral Insulated Cable, MI Cable
- Compensating Cable
- Thermocouple Wire
- YSV Solenoid Valve
- Stainless Steel Solenoid Valve
- ZW Water Air Solenoid Valve
- RSP Pilot Solenoid Valve
- RSQ Low Power Solenoid Valve
English
Français
Español
Plate Gas and Liquid Solenoid Valve
Plate Gas and Liquid Solenoid Valve
Features
1. The plate gas and liquid solenoidvalve is a valve for use with water, gas and oil.
2. It is sealed by the VITON.
3. Medium temperature: -10～120℃.
4. Protection degree of the coils: encapsulate coil: IP65.
5. Acting pattern of the plate gas and liquid solenoid valve: direct acting.
6. Working voltage: AC220V,AC110V, DC24V andDC12V.
7. Materials: brass (HPb59-1).
8. Voltage range: AC -15%～10% DC-10%～10%.
Pictures
YSL028
YSL028 (2)
YSL028 (two position and two way)
231S
231S (2)
231S (two position and three way, supply hole is optional)
231W
231W (2)
231W (two position and three way)
All the plate type joints are the same.
Technical Parameters of the Plate Gas and Liquid SolenoidValve
| Model | Working Pattern | Hole Diameter (mm) | Working Voltage (Bar) | Cv Factor | Note | |
| AC | DC | |||||
| YSL028 | Two position and two way (normally closed) | 1.5 | 0～30 | 0～20 | 0.06 | Supply hole: 1 |
| 2.0 | 0～25 | 0～16 | 0.12 | |||
| 231S | Two position and three way (normally open) | 1.5 | 0～15 | 0～12 | 0.06 | Supply hole: 1 or 3 |
| Two position and three way (normally closed) | 1.5 | 0～10 | 0～10 | 0.06 | Supply hole: 2 | |
| 2.0 | 0～8 | 0～8 | 0.12 | |||
| 231W | Two position and three way (normally closed) | 1.0 | 0～10 | 0～10 | 0.03 | Supply hole: 2 |
| 1.2 | 0～10 | 0～10 | 0.05 | |||
| 1.5 | 0～8 | 0～6 | 0.06 | |||
| 2.0 | 0～8 | 0～5 | 0.12 | |||
| 2.5 | 0～5 | 0～3 | 0.20 | |||
YUYAO NO.4 INSTRUMENT FACTORY is a major manufacturer ofplate liquid solenoid valve, based in China. We offer various types of products such asplate gas solenoid valve, low power solenoid valve, water cooler solenoid valveand so on. Our products are high qualityand competitively priced. We can completethe full chain of manufacturing irons solenoid valve, plastic solenoid valve,etc. right here in China. Our lower manufacturing cost can save yourpurchasing cost. A more detaileddescription of our product is shown on the page.
- Exhaust Solenoid Valve Exhaust Solenoid Valve, YSV-Z, YSE010-ZFeatures 1. The exhaust solenoidvalve is a valve for use with liquidand compressed gas.2. The temperature of t
- Gas and Liquid Solenoid Valve Gas and Liquid SolenoidValveFeatures 1. The gas and liquidsolenoid valve is a valve for use with waterand solar energy. 2. Workingpattern: directact
- DFD Solenoid Valve DFD SolenoidValveFeatures 1. The DFD solenoid valveis a valve foruse with thewater, liquid, gas and oil(less than 20CST).2. The temperature of the me
- Thermocouple Strip Thermocouple Strip Description We manufacture high quality thermocouple strip conforming to IEC or U.S. standards, which is suite
- Compensation Wire Compensation Wire Implemented standard: IEC584-3 The compensation wire is used to extend the cold end of the thermocouple in th