United Kingdom
United States
Argentina
Brazil
China
France
Germany
Japan
Korea
Russia
Spain
Switzerland
Thailand
UAE
Vietnam
Poland
Italy
Morocco
Malaysia
Portugal
India
Canada
- FVMQ Sheet (Fluorosilicone Rubber Sheet)
- FKM Hose (Fluoroelastomer Hose)
- FKM Cords (Fluoroelastomer Cords)
- FKM Sheets (Fluoroelastomer Sheet)
- PTFE Porous Membrane (Teflon Membrane)
- PTFE Needle Felt (Polytetrafluoroethylene Needle Felt)
- PTFE Fiber (Teflon Fiber)
- PTFE Joint Sealants (Expanded Teflon Tape)
- PTFE Sheet (Expanded Teflon Sheet)
- Fluorosilicone Trimer (D3F)
- Fluorosilicone Oil
- Sodium P-perfluorous Nonenoxy Benzenesulfonate (OBS)
- FEP Emulsion (Fluorinated Ethylene Propylene Emulsion)
- PTFE Emulsion (Polytetrafluoroethylene Emulsion)
- PVDF Resin (Polyvinylidene Fluoride Resin)
- FEP Resin (Fluorinated Ethylene-Propylene Resin)
- PTFE Fine Powder
- Granular PTFE Resin (PTFE Molding Powder)
- PTFE Micro Powder (Polytetrafluoroethylene Powder)
- Curative FC50
- Curative FC20 and FC30
- BPP (Benzyltriphenylphosphonium Chloride)
- Bisphenol AF
- Diamine Curing Agent
- Diamine Curing Agent
- Perfluoroelastomer (FFKM)
- Liquid Fluorosilicone Rubber (Liquid FVMQ)
- Fluorosilicone Rubber (FVMQ)
- Fluoroelastomer Compound (FKM Compound)
- Fluoroelastomer Precompound (FKM Precompound)
- Fluoroelastomer Raw Gum (FKM Fluorocarbon Rubber)
- Tetrafluoroethylene-Propylene Rubber (FEPM)
- Microfiltration Membrane (PTFE Filter Membrane)
EnglishPTFE Micro Powder (Polytetrafluoroethylene Powder)
Introduction:
The PTFE micro powders (polytetrafluoroethylene powder), fine-particle, are one kind of low molecular weight polytetrafluoroethylene (PTFE) with white color. It can be used as additives in all kinds of applications, so that the non-stick and antifriction properties of the matrix materials can be improved. There are mainly 3UW-EN, 5SW-EN, 10SW-EN, 12SW-EN, and 15SW-EN.
Type:
1. 3UW-EN (PDF)
2. 5SW-EN (PDF)
3. 10SW-EN (PDF)
4. 12SW-EN (PDF)
5. 15SW-EN (PDF)
The typical one:
PTFE Micro Powder - FLUORON 3UW
Description:
The 3UW is produced by radiation of a finely divided Polytetrafluoroethylene micro powder. If there have 1-3% levels of 3UW, the properties and performance of other materials like oil based heat set inks, stains/varnishes, and various lubricants can be improved.
Application:
If add 3UW in the printing inks, the printing ink will have excellent abrasion and rub resistance; moreover, it can also enhances the surface-slip performance in a cured ink film too.
The chart below is the detail of physical properties about 3UW.
Typical Physical Properties:
| Average Particle Size | 3.5 microns |
| 99% passing | 8.5 microns |
| NPIRI reading | 2.0 |
| Body | medium flow rate |
| Bulk Density | 250 g/l |
| Color | White to Off White |
Remarks:
The particle size of PTFE micro powders (polytetrafluoroethylene powder) range from 1 to 20m and it can be produced just by radiation. This product can meet the standard of Nano grade and FDA compliant grade.
- Granular PTFE Resin (PTFE Molding Powder) Introduction: This granular PTFE resin (PTFE molding powder), a homopolymer of tetrafluoroethylene, is made by the way of suspension polymerizat
- PTFE Fine Powder Brief Description: This PTFE fine powder is a kind homopolymer of tetrafluoroethylene, using the way of dispersion polymerization. The products
- FEP Resin (Fluorinated Ethylene-Propylene Resin) Introduction: This perfluorinated ethylene-propylene (FEP) a kind of copolymer, combined with tetrafluoroethylene (TFE) and hexafluoropropylene
- PVDF Resin (Polyvinylidene Fluoride Resin) Introduction: This polyvinylidene fluoride resin (PVDF resin) FV900 series, fluorocarbon thermoplastics, has the feature of good thermal resista
- PTFE Emulsion (Polytetrafluoroethylene Emulsion) PTFE Emulsion (Polytetrafluoroethylene Emulsion)Brief Introduction: The PTFE emulsion (polytetrafluoroethylene emulsion), a concentrated PTFE aqu