- FVMQ Sheet (Fluorosilicone Rubber Sheet)
- FKM Hose (Fluoroelastomer Hose)
- FKM Cords (Fluoroelastomer Cords)
- FKM Sheets (Fluoroelastomer Sheet)
- PTFE Porous Membrane (Teflon Membrane)
- PTFE Needle Felt (Polytetrafluoroethylene Needle Felt)
- PTFE Fiber (Teflon Fiber)
- PTFE Joint Sealants (Expanded Teflon Tape)
- PTFE Sheet (Expanded Teflon Sheet)
- Fluorosilicone Trimer (D3F)
- Fluorosilicone Oil
- Sodium P-perfluorous Nonenoxy Benzenesulfonate (OBS)
- FEP Emulsion (Fluorinated Ethylene Propylene Emulsion)
- PTFE Emulsion (Polytetrafluoroethylene Emulsion)
- PVDF Resin (Polyvinylidene Fluoride Resin)
- FEP Resin (Fluorinated Ethylene-Propylene Resin)
- PTFE Fine Powder
- Granular PTFE Resin (PTFE Molding Powder)
- PTFE Micro Powder (Polytetrafluoroethylene Powder)
- Curative FC50
- Curative FC20 and FC30
- BPP (Benzyltriphenylphosphonium Chloride)
- Bisphenol AF
- Diamine Curing Agent
- Diamine Curing Agent
- Perfluoroelastomer (FFKM)
- Liquid Fluorosilicone Rubber (Liquid FVMQ)
- Fluorosilicone Rubber (FVMQ)
- Fluoroelastomer Compound (FKM Compound)
- Fluoroelastomer Precompound (FKM Precompound)
- Fluoroelastomer Raw Gum (FKM Fluorocarbon Rubber)
- Tetrafluoroethylene-Propylene Rubber (FEPM)
- Microfiltration Membrane (PTFE Filter Membrane)
PTFE Joint Sealants (Expanded Teflon Tape)
Introduction:
These PTFE joint sealants (polytetrafluoroethylene joint sealants), made of virgin PTFE fine powders, are produced by moulding. It can be stretched under high temperature. Moreover, it has the feature of low friction, excellent chemical resistance, good sealing performance, and superior flexibility. The expanded teflon tape has a wide range of service of temperature between -160C and +280C.
Applications:
With special-shaped mouths, expanded PTFE joint sealant is suitable for sealing of reactors, turbine generators or containers.
Installation:
1. It is easier for expanded PTFE joint sealant (polytetrafluoroethylene joint sealants) to install on vertical surfaces, because it is soft, pliable and flexible.
2. These PTFE joint sealants can clean flange, remove scale and other foreign materials.
3 When install it, you can strip off the release paper, push the adhesion surface at the center of flange surface, and stick on there in a ring shape.
4. There is 1to 2cm bolt seat at the edge of it. Fix the flange to the opponent and tighten each bolts uniformly, then it is flattened ribbon-like to 1.5 times width and the over lapped part is closely in contact.
5. Tighten each bolts uniformly.
Specification:
| Size Recommendation | Other Nonstandard Flanges | ||
| Nominal Pipe Size (ANSI B16.5) | Recommended Size of PTFE Joint Sealants | Sealing Width | Recommended Size of PTFE Joint Sealants |
| 1/2", 3/4" | 1/8" | 1/8"-1/4" | 1/8" |
| 1", 1-1/4", 1-1/2" | 3/16" | 5/16"-3/8" | 3/16" |
| 2", 2-1/2", 3", 3-1/2" | 1/4" | 7/16"-5/8" | 1/4" |
| 4"-6" | 3/8" | 3/4"-1" | 3/8" |
| 8"-16" | 1/2" | 1-1/8"-1-1/2" | 1/2" |
| 18"-20" | 5/8" | 1-5/8"-2" | 5/8" |
| 24"-36" | 3/4" | 2"-2-1/2" | 3/4" |
| 36"-60" | 1" | 2-1/2"-5" | 1" |
| 60" and over | 2" | 5" and over | 2" |

- PTFE Fiber (Teflon Fiber) Introduction of PTFE Fiber (Polytetrafluoroethylene Fiber): This PTFE fiber (polytetrafluoroethylene fiber) is used as main, flock or multifilam

- PTFE Needle Felt (Polytetrafluoroethylene Needle Felt) Features: 1. This PTFE needle felt (polytetrafluoroethylene needle felt) has excellent chemical resistance. 2. Goof cleaning ability and high

- PTFE Porous Membrane (Teflon Membrane) Introduction: This PTFE porous membrane (polytetrafluoroethylene porous membrane), made of 100% expanded PTFE, produces millions of micropores, no

- FKM Sheets (Fluoroelastomer Sheet) Dimension: This FKM sheets (fluoroelastomer sheet) divided it into flat sheet and coiled sheets. The flat sheets (Up to 500 500mm, Thickness

- FKM Cords (Fluoroelastomer Cords) Dimension: Any dimension can be available according to the customers\' requirements. Material: Fluoroelastomer Characteristics: T


United Kingdom


English