ETW,PS04 Water Pressure Switch,China PS04 Water Pressure Switch Manufacture

Manufacturers

PS04 Water Pressure Switch

English

Français

Русский

PS04 Water Pressure Switch

PS04-W Water pressure switches provide time-tested, reliable control for automatic water systems. The Water Pressure switch is universally acceptable for use as original equipment on water well pumps or pumping systems.

PS04-WR Water pressure switch prevents the pump from starting whenever the system falls considerable below cut-in pressure. Upon the restorations of the water supply, it will automatically cut-in.
A manual reset lever is depressed until a build up of system pressure permits automatic operation. Its simple design makes it easy to use for professionals and nonprofessionals alike.

Features of PS04-W Water Pressure Switch
Corrosion resistant and non metallic cover
No wire looping
Straight thru wiring
Visible contacts 2 pole double break
No drift pressure settings
Captive cover screw
Ample wiring room
Ground screws
Easy to adjust
Stainless steel connection is optional
Other connection fittings are optional

Technical Data of PS04-W Water Pressure Switch

Model	Min On (Cut-In)PSI	Max Off (Cut-Out) PSI	Differential PSI	Factory Setting PSI	Electrical Rating		Pipe Fittings	Contact Arrangement
Model	Min On (Cut-In)PSI	Max Off (Cut-Out) PSI	Differential PSI	Factory Setting PSI	120VAC	240VAC	Pipe Fittings	Contact Arrangement
PS04-W1	15	80	15-30	20-35	20A	12A	1/4" Male or Female NPT	NC
PS04-W2	30	100	20-35	30-50	20A	12A	1/4" Male or Female NPT	NC
PS04-WS3	35	150	30-40	85-115	20A	12A	1/4" Male or Female NPT	NC

Note: 1Kgf/cm2 = 14.2PSI, 1bar = 14.5PSI

Model	Max On (Cut-in) PSI	Min Off (Cut-In) PSI	Differential PSI	Factory Setting PSI	Electrical Rating		Pipe Fittings	Contact Arrangement
Model	Max On (Cut-in) PSI	Min Off (Cut-In) PSI	Differential PSI	Factory Setting PSI	120VAC	240VAC	Pipe Fittings	Contact Arrangement
PS04-WR1	80	15	15-30	35-20	20A	12A	1/4" Male or Female NPT	NO
PS04-WR2	100	30	25-35	50-30	20A	12A	1/4" Male or Female NPT	NO
PS04-WR3	150	35	30-40	115-85	20A	12A	1/4" Male or Female NPT	NO

Feedback Form

Other Products

PA03 Air Pressure Switch The air pressure switch (25-175 PSI) is used to regulate the tank pressure between two preset values on small (up to 175psi) electrically driven air

PL02 Pressure Switch (5-1000 mbar) The pressure switch is designed as an economical interface between pressure systems and Printed Circuit Boards. This Pressure switch can be used as a

PL03 Vacuum Pressure Switch (10-800 mbar) The vacuum pressure switch is applied to detection of both negative and positive pressure, such as the family vacuum cleaner. PL03 vacuum pressure sw

PL07 Pressure Switches (20-2500Pa) The pressure switches are capable to sense tiny pressure change and widely used to control the flue of aerator, to monitor fan and air conditioner. P

PL06 Pressure Switch (15-2500mbar) The pressure switch can be applied to detection positive or negative pressure. It can be used as a gauge or differential pressure switch with almost