United Kingdom
United States
Argentina
Brazil
China
France
Germany
Japan
Korea
Russia
Spain
Switzerland
Thailand
UAE
Vietnam
Poland
Italy
Morocco
Malaysia
Portugal
India
Canada
Product List
- SDY Series Junction Box For Energy Meter
- SMJL-SMJJ(Naked-Insulated Cable)insulated Joint Pipe
- SMJY(Different Diameter)Pre-insulated Joint Pipe
- SMJT(Same-diameter)Pre-insulated Joint Pipe
- Terminals Assortment
- Non-Insulated Terminal
- Non-Insulated Spade Terminal
- Insulated Spade Terminal
- Insulated Ring Terminal
- Copper Tube Terminal
- MG-METAL
- PG-METAL
- MG-NYLON
- PG-NYLON
- SF-8808
- SF-8807
- SF-8806
- SF-8805
- SF-8804
- SF-8803
- SF-CB04
- SF-CB03
- SF-CB02
- SF-CB01 (Ultra-thin Series)
- 80x80x38mm
- More
English
Español
العربMulti-connection Terminal Block
Multi-connection Terminal BlockParameters
| ITEM NO. | SKJ-4/1-2 | SKJ-4RE | |
| Order No. | 01096 | 01088 | |
| Dimensions | |||
| Width x Length x Height | (mm) | 50.5/6.2/47 | 47.5/6.2/58.5 |
| Nominal screw diameter | (mm) | M3 | M3 |
| Torque | (Nm) | 0.6-0.8 | 0.6-0.8 |
| Stripping Length | (mm) | 8 | 8 |
| Parameter | |||
| Voltage Rating | (V) | 500 | 500 |
| Current Rating | (A) | 32 | 41 |
| ITEM NO. | SKJ-4/1-2 | SKJ-4RE | |||
| Wire section | (mm2) | 4 | 4 | ||
| Wire Range | |||||
| Rigidity wire range | (mm2) | 0.2-4 | 0.2-6 | ||
| Soft wire range | (mm2) | 0.2-4 | 0.2-4 | ||
| DIN Rails | Type | Order No. | Type | Order No. | |
| 15L | 02006 | 15L | 02006 | ||
| G32- | G32- | ||||
| 18/15 | 02007 | 18/15 | 02007 | ||
| TH35-7.5 | 02005 | TH35-7.5 | 02005 | ||
| End clapboard | |||||
| SKJ-2.5/1-2EG | 01102 | SKJ-4REG | 01089 | ||
| Clapboard | |||||
| Used for electric isolation between adjacent jumpers. After that, insert it. | SKJ-G(TS-K) | 01030 | SKJ-G(TS-WK) | 01103 | |
| Compensation room clapboard | |||||
| Laid out with common terminal, compensating for the staggered space. | |||||
| Internal Jumper | |||||
| Used for transversely bridge connected in the center of terminal block, according to actual operation the voltage can be distributed. | 10 pole | SFBI 10-6 | 01041 | SFBI 10-6 | 01041 |
| 3 pole | |||||
| 2 pole | |||||
| External Jumper | |||||
| 2 pole | SEB2-6 | 01058 | SEB2-6 | 01058 | |
| 3 pole | SEB3-6 | 01076 | SEB3-6 | 01076 | |
| 10 pole | SEB10-6 | 01052 | SEB10-6 | 01052 | |
| Mark Tag | |||||
| Blank | SZB6 | 01065 | SZB6-10 | 01065 | |
| Pre-printed 10 no.Horz. | SZB6 (Horz.) | SZB6 (Horz.) | |||
| Pre-printed 10 no.Vert. | SZB6 (Vert.) | SZB6(Vert.) | |||
As a China based multi connection terminal block manufacturer, we also produce earth insulation piercing connector, insulation cable clamp, flexible conduit, etc. to suit your various needs. Additionally, we can manufacture terminal block according to customers' specific requirements. With the advantage of superior quality and reliability, our products are in increasing demand in Europe, South America, the Middle East, Southeast Asia, among others.
If you have any related need, please contact us via any of the methods listed on the website.
Feedback Form
Other Products
- Mini Type Double Level Terminal Block
- Mini Type Double Level Terminal Block Parameters ITEM NO. SKJ-2.5/2-2E SKJ-2.5/2-2EL Order No. 13001 13002 Dimensions Width x Length x Height (mm) 62.2/5.2/47.5 62.2/5.2/47.5 Nominal screw diameter (mm) M3 M3 Torque (Nm)
- Mini Type Terminal Block
- Mini Type Terminal Block Parameters ITEM NO. SKJ-2.5E SKJ-4E SKJ-6E Order No. 01083 01084 01085 Dimensions Width x Length x Height (mm) 28/5.2/32 28/6.2/32 35/8.2/36 Nominal screw diameter (mm) M3 M3 M4
- Mini Type Grounding Terminal Block
- Mini Type Grounding Terminal Block Parameters ITEM NO. SKJ-4/EJD Order No. 01108 Dimensions Width x Length x Height (mm) 28.5/6.2/32 Nominal screw diameter (mm) M3 Torque (Nm) 0.6-0.8 Stripping Length (mm)
- Grounding Terminal Block
- Grounding Terminal Block Ground 35 and 32mm DIN Rail Use ground blocks instead of grounding studs and wire lugs to terminate ground wires, saving installation and wiring time. Ground blocks clamp mechanically onto the DIN Rail by tightening the center mounting screw, making a reliable electrical connection between the cage clamp terminals and the DIN Rail. The rail serves as a busbar and automatically distributes ground potential to all other ground terminals on the same rail.