UserName: PassWord:
My account
My account
Mechanical Thermostat,China Mechanical Thermostat
Product List
ETW International,ETW Manufacturers
M
Mechanical Thermostat

Mechanical Thermostat



Mechanical Thermostat

Description
1. The mechanical thermostat can be applied forcontrolling heating and cooling equipment, filter fans or signal devices.
2. The room thermostat registers the surrounding air and can switch bothinductive and resistive loads via snap-action contact.

Features
1. Adjustable temperature
2. High switching capacity
3. Small
4. Terminals easily accessible
5. Clip fixing
6. Change-over contact

Technical Data

Switch temperature difference

4K ( 1.5K tolerance)*

Sensor element

thermostatic bimetal

Contact type

change-over snap-action contact

Contact resistance

< 10mOhm

Service life

> 100 000 cycles

Max. switching capacity, NC

250VAC, 10 (4) A

DC 30W

Max. switching capacity, NO

250VAC, 5 (2) A

DC 30W

EMC

acc. to EN 55014-1-2, EN 61000-3-2, EN 61000-3-3

Connection

4-pole terminal, clamping torque 0.5Nm max.: rigid wire 2.5mm, stranded wire (with wire end ferrule) 1.5mm

Mounting

clip for 35mm DIN rail, EN50022

Casing

plastic according to UL94 V-0, light grey

Dimensions

67 x 50 x 38mm

Weight

approx. 0.10kg

Fitting position

variable

Operating/Storage temperature

-20 to +80C (-4 to +176F) / -45 to +80C (-49 to +176F)

Protection type

IP20

Approvals

-

*Connecting terminal "N" (RF heating resistor) causes the thermal feedback to work and so reduces the switch temperature difference to approx. 0.5K.

Art. No.

Operating voltage*

Setting range

01170.0-00

230VAC

+5 to +60C

01170.0-02

230VAC

-20 to +30C

Note: operating voltage 120VAC wit settingF upon request

Feedback Form
Other Products
  • Mechanical HygrostatMechanicalHygrostatDescription The electromechanical hygrostat is specially designed to control enclosureheaters so that the dew point is raised when
  • RC-6 Residual Current Device RC-6 Residual Current DeviceDescription Residual current device, also known as ground fault circuit interpreter (GFCI), ground fault interpreter
  • RC-7 Residual Current Device RC-7 Residual Current DeviceDescription Residual current device (RCD), sometimes called "safety switch" or simply "RCD" in Australia, is manufactu
  • Miniature Circuit BreakerMiniature Circuit BreakerDescription1. A miniature circuit breaker is anautomatically-operated electrical switch used to protect electrical circuitfro
  • DC Miniature Circuit BreakerDC Miniature Circuit BreakerFeatures 1. DC Circuit Breaker consists of shell, operating mechanism, heatrelease, electromagnetic release, contact syste

United States | Argentina | Brazil | China | France | Germany | Japan | Korea | Russia | Spain | Switzerland | Thailand | UAE | United Kingdom | Vietnam | Poland | Italy | Morocco | Malaysia | Portugal | India | Canada

Copyright © 2008 - ETW International. All rights reserved.