LED T8 Tube

Our high voltage LED fluorescent lamp, T8 series has fourkinds of power for your choices, including 9w, 14w, 20w and 25w. Its tubelength is 0.6m, 0.9m, 1.2m and 1.5m,which is same with traditional fluorescent lamp. Compared with traditional fluorescentlamp, our high voltage LED fluorescent lamp is energy-saving. To illustrate,the actual power consumption of traditional 20w fluorescent tube is equal tothat of 53w fluorescent tube. However, our 9w LED is brighter than 20wtraditional fluorescent tube. Whats more, its light is much softer and wontcause visual fatigue.

In the following text, we list some other obvious featuresof our high voltage LED fluorescent lamp, T8 series.
(1) Long service life
The service life of our high voltage LED fluorescent lamp is quite long, andits range is within 30, 000-50, 000 hours.
(2) Adjustable voltage range
The voltage range is within AC85V-260V.
(3) Environmental protection
(4) High luminous efficiency
(5) No ultraviolet rays

To achieve the ideal lighting effects, we introduce someformulas to our customers to help them choose the suitable LED high voltage LEDfluorescent lamp.

Formulas
(1) Power consumption = power consumption of each tube* quantity of tube* thetime of using electricity
(2) Electricity bill = electricity bill per kilowatt-hour* total powerconsumption
(3) Tube cost = unit price per tube* quantity of tube

Note
When calculating the power consumption of traditional fluorescent lamp, usersshould add to the power consumption of ballast. Normally, the power consumptionof ballast installed at 20w tube is 4w, the power consumption of ballastinstalled at 36w tube is 6w, and the power consumption of ballast installed at40w tube is 6-8w. Besides, the replacement cost of traditional fluorescent lampis not included.

Through the above-mentioned formulas, users can easilycalculate the using cost of traditional or LED fluorescent lamp.

Applications
Our high voltage LED fluorescent lamp, T8 series can completely replace thecommon fluorescent lamp. So it has wide applications, and is widely used inoffices, supermarkets, schools, hospitals, hotels, workshops, undergroundparking garages, etc

Technical Parameters of T8Series High Voltage LED Fluorescent Lamp

Table 1

Table 2

Installation
1. The old-fashioned inductance type fluorescent lamp
First, shut off power supply, and then take off the starter. After that, cutoff the wiring of the starter and wrap the wiring with insulating tape. Then,you can install the LED tube.
2. Electronic type fluorescent lamp
First, shut off power supply, and then remove the ballast. After that, connect220V power line and zero line to the two ends of lamp holder. Then, you caninstall the LED tube.

Note
The installation work should be finished by professional electricians.

Packaging

Instruction
1. The LED tube is packed by pearl wool.
2. Each inner box has a LED tube.
3. Each outer box has 20 LED tubes.