2000 Capsule Filling Machine

Main Features of our Capsule Filling Machine
1. In order to improve quality and operation efficiency, by our innovations and reconstructions, the capsule filling machine is enlarged, to be larger than similar products by 9cm.

2. Uses enlarged cam and adopts the RU125 to RU100 cam to guarantee the quality. Although the cost is increasing, the machine is much more stablity and life of machinery are improved greatly.

3. Our capsule filling machine enlarges the design of dosing disk, increases the 3cm based on original design and it makes dose filling accuracy much improved and better than China national standards.

4. This capsule filler measures based on lower place, 3D adjustment and reduces natural deforms on measurement discs and copper sauces. Furthermore, uniform clearances between parts, reduces leakage of powder and makes it easy to clean and assembly.

5. Our capsule filling machine improves turntable design, uses original Japanese straight oil-free bearings of 90 pcs to ensure accuracy and service life. Other manufacturers use only 40 turntable bearings, and 50 pcs are installed with copper which is easily wear and tear and difficult to replace.

6. The capsule filler adopts man-machine interface, complete functions and cam eliminate faults such as lacking of capsule and materials. While the machine is run out of capsules and powder, it will stop automatically with alarm and it will display on the touch screen the output of capsules with materials.

Working Descriptions of our Capsule Filling Machine

1. The empty gelatin capsules are fed from a storage hopper to the rectifier and inserted with the aid of vacuum into one of the 10 sets of carrier segments and each carrier segment holds 18 empty capsules.

2. The carrier segment's upper holder holding the caps is now lifted separation of cap and body is assisted by vacuum.

3. The upper holder starts retracting while the lower proceeds to the dosing station of capsule filling machine.

4. Complete retraction of the upper holder is done at this station.

5. Powder slug is inserted into the capsule body, if there is no capsule body held at the lower holder, the powder slug will be further pushed downward and collected in a receiver tray.

6. The ejection of un-separated capsule or the up-side-down capsule caps is performed with an aid of upward stroking rods.

7. The upper holder of our capsule filling machine starts moving outward to the position above the lower holder.

8. At this station, while upper and lower holders are closely matched the capsule bodies are pushed upward into the caps by steel rods.

9. Now the closed capsules arriving at this capsule filler station will push upward again by the other steel rods and leave the carrier segment.

10. Carrier segment is vacuum-cleaned and proceeds to the capsule insertion station.

Technical Specification of our Capsule Filling Machine

As a professional capsule filling machine manufacturer and supplier in China, we at Tianhong also offer polishing machine, Transparent Film Packing Machine, cartoning machine, and semi automatic capsule filling machine, among others.