- HP-1 Pressure Switch
- HP-5 High Pressure Switch
- HP-4 Vacuum Switch
- HP-3 Extended Duty Pressure Switch
- HP-2 Pressure Switch
- AFS Pressure Switches (12-2500 Pa)
- PL05 Pressure Switch (40-800 Pa)
- PL04 Pressure Switch (37-8500 Pa)
- PL06 Pressure Switch (15-2500mbar)
- PL07 Pressure Switches (20-2500Pa)
- PL03 Vacuum Pressure Switch (10-800 mbar)
- PL02 Pressure Switch (5-1000 mbar)
- PA03 Air Pressure Switch
- PS04 Water Pressure Switch
- PS03 Water Pressure Switch
- PS02 Water Pressure Switch
- PS01 Water Pressure Switch
- PA04 Air Pressure Switch
- PA02 High Air Pressure Switch
- PA01 3-Phase Air Pressure Switch
- Air Pressure Switch
- PL01 Low Pressure Switch (5mbar-300mbar)
- WS-1 Water Level Switch
- HS-2 Air Switch (20-800 mbar)
- HS-1 Air Switch (20-1000 mbar)
HS-2 Air Switch (20-800 mbar)
The air switch utilizes two high-quality miniature snap-action switches with higher current capacity, SPST or SPDT contact form and switch dead bands. The switch is diaphragm operated. Diaphragm material can be selected according to the operating medium, temperature range and other parameters.
The pressure switch can control the system pressure in a steady range by adjusting the operating pressure and the differential pressure of the two snap-action switches.
Technical Data
Model | HS-2 |
Medium | Non hazardous gas |
Operating Pressure Range | 20-800 mbar |
Proof Pressure | 1 Bar |
Operating Temperature Range | -10 to +85 |
Contact Arrangement | SPST or SPDT |
Electrical Rating | 25Amps@240VAC,2HP/1HP@120VAC, 21Amps@240VAC,2HP/1HP@120VAC, 10Amps@240VAC , 5Amps@240VAC |
Terminals | 6.35 or 4.88 mm male Q.C. |
Connection | Inlet 4.0mm for tube connection (Option: 1/8 NPT or other fittings are available) |
Note: 1 PSI=68.95 mbar, 1 Bar=100 kPa=1000 mbar

- WS-1 Water Level Switch The water level switch is a reliable component used with solenoid valve to control the automatic replenishment of water. It is widely used in washing

- PL01 Low Pressure Switch (5mbar-300mbar) The low pressure switch is designed as an economical interface between pressure systems and printed circuit boards. This switch can be used as a gaug

- PA01 3-Phase Air Pressure Switch The 3-Phase Pressure Switches are used to regulate the tank pressure between two preset values on 3 phase electrically driven air compressors.The 3-P

- PA02 High Air Pressure Switch The rugged high air pressure switch (15-250 PSI) is designed for the demanding requirements of lager, heavy duty commercial air compressors (up to 25


United Kingdom


English
Français
Русский