- HP-1 Pressure Switch
- HP-5 High Pressure Switch
- HP-4 Vacuum Switch
- HP-3 Extended Duty Pressure Switch
- HP-2 Pressure Switch
- AFS Pressure Switches (12-2500 Pa)
- PL05 Pressure Switch (40-800 Pa)
- PL04 Pressure Switch (37-8500 Pa)
- PL06 Pressure Switch (15-2500mbar)
- PL07 Pressure Switches (20-2500Pa)
- PL03 Vacuum Pressure Switch (10-800 mbar)
- PL02 Pressure Switch (5-1000 mbar)
- PA03 Air Pressure Switch
- PS04 Water Pressure Switch
- PS03 Water Pressure Switch
- PS02 Water Pressure Switch
- PS01 Water Pressure Switch
- PA04 Air Pressure Switch
- PA02 High Air Pressure Switch
- PA01 3-Phase Air Pressure Switch
- Air Pressure Switch
- PL01 Low Pressure Switch (5mbar-300mbar)
- WS-1 Water Level Switch
- HS-2 Air Switch (20-800 mbar)
- HS-1 Air Switch (20-1000 mbar)
HP-2 Pressure Switch
The pressure switch is used for pressure controlling of Air, Water, Internal wiring of electric refrigerating equipment or room cooler units or remote outdoor condensing units for domestic cooling systems.
Features
Automatic Reset Pressure switch designed.
Wide range of pressure settings and meet a broad variety of application.
Used: Pressure controlling of Air, Water, Internal wiring of electric refrigerating equipment or room cooler units or remote outdoor condensing units for domestic cooling systems.
Typical applications: safety controls, air conditioning and refrigeration.
Model | HP-2 |
Medium | Air, Water, motor oils, transmission oils, Hydrocarbon Media, Refrigeration fluid |
Pressure Set Point | Actuation from 0.1 to45 Bar |
Max Operating Pressure | 25 Bar for actuation up to 10 Bar |
Proof Pressure | 35 Bar for actuation up to 10 Bar |
Burst Pressure | 5000 PSI (345 bar) |
Operating Temperature Range | -30 C to ~ 80 C |
Switch Type | Direct action, blade contact, SPST NC, NO |
Electric Rating | 120/240VAC, 375VA |
Dielectric Strength | 750 Vrms across open contacts |
Terminals | #8-32 screws, 1/4 blade |
Life at Related Load | 100,000 cycles |
Connection | 1/8NPT, G1/8", 1/4NPT, G1/4" |
Options | Various connector thread sizes; wire leads (potted & sealed); protective cover. |

- HP-3 Extended Duty Pressure Switch The extended duty pressure switch is specifically designed to stand up to extended duty applications. This switch is factory set but capable of field

- HP-4 Vacuum Switch The vacuum switch is specifically designed to stand up to extended duty applications. This vacuum switch is factory set. It features a rubber diaphra

- HP-5 High Pressure Switch The high pressure switches are robust, compact and designed to operate in harsh environments at various pressures. Because of its special internal de

- HP-1 Pressure Switch The pressure switch is designed for control pressure with higher current capacity. It is widely used in steam cleaner, steam sadiron and other pressu

- HS-1 Air Switch (20-1000 mbar) The air switch is provided with a snap action switching for higher current capacity, SPDT contact form and switch dead bands. The air switch can be u


United Kingdom


English
Français
Русский