ETW,Glass Wool Production Line,China Glass Wool Production Line Manufacture

Product List

Manufacturers

Glass Wool Production Line

English

Español

Русский

Glass Wool Production Line

GlassWool Production Line

Brief Introduction of Glass Wool
Glass wool is made of natural ores such as quartz sand, dolomite, feldspar,limestone and so on, which are melted into glass fluid by adding in accessoriessuch as calcined soda and borax and then drawn, blownor thrown into very thin fibers by external force under fusing state and now itis a kind of insulation material with excellent characters.

Main Materials toProduce Glass Wool

Item	Description
Quartz sand	Its main composition is SiO₂, content of which is more than 90%
Feldspar	It can be classified into potash feldspar albite according to its chemical composition. Al₂O₃>15%, SiO₂<70%, Fe₂O₃<0.3%, R₂O>10%
Dolomite	MgO>20%, CaO<32%, Fe₂O₃<0.15. Dolomite is water-absorbent, so it should be stored in dry places
Calcined soda	Na₂CO₃>98%, NaCl<1%, Na₂SO₄<0.1%, Fe₂O₃<0.1%
Borax (Na2B4O7.10H2O)	B₂O₃>35%, Fe₂O₃<0.01%, Na₂SO₄<0.02%
Limestone	CaO50%, Fe₂O₃0.15%
Cullet	Broken and non-conforming glass products as well as glass chops made by chilling vitreous fluid in water, whether they are glass scraps produced in production or glass waste rejected in society, all can be used as raw materials for glass

Features of Glass Wool
As a kind of inorganic fiber, glass wool has the following basiccharacteristics:
1. Good thermal insulation performance under both high and low temperature.
2. Statutory incombustible material --- it neither burns, nor gives offharmful gas.
3. Uniform resilience force.
4. Excellent sound-absorption performance and noise reducing effect.
5. Low moisture absorption rate under humid conditions.
6. Low coefficient of linear expansion.
7. Low aging rate, being able to maintain the original performance afterlong-time use.
8. Excellent handling characteristics.

TechnicalParameters of Glass Wool Production Line

Item	NEHM-3	NEHM-5	NEHM-8	NEHM-10	NEHM-15
Production Capacity (mt/year)	3000	5000	8000	10000	15000
Workshop (LW) (m)	7515	8515	9015	9520	10025
Dimension (LWH)(m)	651014	751014	801014	851514	902014
Weigh t(mt)	180	190	200	210	300
Power (kw)	630	750	950	1000	1300
Power Supply	220V / 380V, 50Hz

Specification of Glass Wool Products

Product	Density (kg/m³)	Dimension (mm)
Product	Density (kg/m³)	Length	Width	Thickness
Board	25~100	1000~10000	500, 600, 630	20~100
Felt	10~28	1000~15000	1000, 1200	30~150
Pipe Cover	Density	Length	Inner Diameter	Thickness
Pipe Cover	10~18	1000	18~315	30~100

Flow Chart ofGlass Wool Production Line
Raw material -> Proportioning -> Elevating -> Feeding -> TankFurnace -> Glass Fluid -> Spinner -> Fiber forming -> WoolCollecting -> Transit conveying -> Curing oven -> Longitudinal cutting-> Aluminum foil facing -> Cross cutting -> Felt rolling -> Packing-> Storing. And for the detailed information please refer to the followingchart:

Feedback Form

Other Products

Sandwich Panel Lamination LineSandwich Panel LaminationLineIntroduction of Sandwich PanelSandwich panel, also called as composite panel, is fabricated by metallicfacings and insula

EPS Production LineEPSProduction LineIntroduction of EPSExpandable Polystyrene, EPS for short, is manufactured by combining styrenewith isobutylene under pressure. When

3D Panel Production Line3DPanel Production LineIntroduction of 3D Panel3D Panel is a kind of three dimensional lightweight structural panels,consisting of a super-insulated p

New Building Materials Machinery New Building Materials Machinery

Autoclaved Aerated Concrete Production LineAutoclavedAerated Concrete Production LineIntroduction of AutoclavedAerated Concrete (AAC) With the obvious advantage of light weight, this Autoclaved