United Kingdom
United States
Argentina
Brazil
China
France
Germany
Japan
Korea
Russia
Spain
Switzerland
Thailand
UAE
Vietnam
Poland
Italy
Morocco
Malaysia
Portugal
India
Canada
Product List
- FVMQ Sheet (Fluorosilicone Rubber Sheet)
- FKM Hose (Fluoroelastomer Hose)
- FKM Cords (Fluoroelastomer Cords)
- FKM Sheets (Fluoroelastomer Sheet)
- PTFE Porous Membrane (Teflon Membrane)
- PTFE Needle Felt (Polytetrafluoroethylene Needle Felt)
- PTFE Fiber (Teflon Fiber)
- PTFE Joint Sealants (Expanded Teflon Tape)
- PTFE Sheet (Expanded Teflon Sheet)
- Fluorosilicone Trimer (D3F)
- Fluorosilicone Oil
- Sodium P-perfluorous Nonenoxy Benzenesulfonate (OBS)
- FEP Emulsion (Fluorinated Ethylene Propylene Emulsion)
- PTFE Emulsion (Polytetrafluoroethylene Emulsion)
- PVDF Resin (Polyvinylidene Fluoride Resin)
- FEP Resin (Fluorinated Ethylene-Propylene Resin)
- PTFE Fine Powder
- Granular PTFE Resin (PTFE Molding Powder)
- PTFE Micro Powder (Polytetrafluoroethylene Powder)
- Curative FC50
- Curative FC20 and FC30
- BPP (Benzyltriphenylphosphonium Chloride)
- Bisphenol AF
- Diamine Curing Agent
- Diamine Curing Agent
- Perfluoroelastomer (FFKM)
- Liquid Fluorosilicone Rubber (Liquid FVMQ)
- Fluorosilicone Rubber (FVMQ)
- Fluoroelastomer Compound (FKM Compound)
- Fluoroelastomer Precompound (FKM Precompound)
- Fluoroelastomer Raw Gum (FKM Fluorocarbon Rubber)
- Tetrafluoroethylene-Propylene Rubber (FEPM)
- Microfiltration Membrane (PTFE Filter Membrane)
EnglishFluorosilicone Rubber (FVMQ)
Description:
This fluorosilicone rubber (FVMQ) from has both physical propertied and excellent thermal stability. The physical propertied FVMQ is the one that of high tensile strength, tear strength, elongation and low compression set, while the thermal stability FVMQ is the one with cold resistance, oil resistance, solvent resistance and good process ability. Our high quality fluorosilicone rubber is different from that of other manufacturers in China, for the details including raw gum, compound. With the control of those details, our products can result in large production scale, even molecular distribution, and full range of available grades and so on. In the process of production, we employ experienced the workers the whole procedure, so that the quality of production lines are guaranteed. Of course, because of having the strong technical capability, we can design and produce the products according to the clients\' requirements.
Please refer to the following chart listing the comparison between fluorosilicone and other manufacturers in China.
Raw Gum Comparison:
| Item | Fluoron | Competitors |
| Raw Material and process control | The first and only Chinese producer who can produce D3F and FVMQ both. With the high-purity raw material, the monomer D3F with purity up to 99.5% and strict control during the entire processes. | Without good monomer produced by them, it\'s hard to supply constant quality as the outsourced D3F material is not assured of high quality. |
| Production Scale | Industrialized production; 50kg to 80kg each batch; Capacity per year is 200tons | 10kg per batch at most; A kind of experimental production; |
| Molecular weight and Catalyst | Raw gum of molecular weight 600000, 800000, 1000000, 1200000, 1500000 or above. It also needs controlled reaction conditions. Besides, molecular weight tolerance of every batch is within 100000. The catalyst we design will remain little after producing. | The molecular distribution of every batch is too wide and the molecular weight is around 1100000 or less. So that the residual of catalyst gives the quality a side effect. |
| Vinyl Content | The vinyl content of raw gums is a fixed value that cannot be adjusted as required ;Can adjust the vinyl content of the raw gum as required to benefit the crosslink of the compound; | The vinyl content of raw gums is a fixed value that cannot be adjusted as required ; |
| Quality Assurance | We have GPC and Ostwald viscometer; Professional quality inspectors inspect and control the quality of the raw material and monomers with 5 GC (gas chromatography ) machines and GPC and Ostwald viscometer; | Without self-supplied D3F, the insecure quality of monomer influences the quality of produced polymers; |
| Technical Support | Great technical team including postdoctoral, doctor and master etc. Strong technical communication and cooperation with the famous research academies and institutes; | Usually supported by literature doc. |
Table2. Compound Comparison:
| Item | Fluoron | Competitors |
| Gravity (25) | 1.25 | 1.26 |
| Brittle Temp. | -65 | -60 |
| Heat resistance | 180-230 | 180-230 |
| Hardness Shore A | 40-80 | 68 max |
| Tensile Strength Mpa | 7-12 | 6-10 |
| Elongation at Break % | 300 | 270 |
| Resilience % | 44 | 38 |
| Compression Set (20024h) | 25% | 30% |
| Low Temp. retraction TR10 | 58 | 60 |
| Solvent Resistance and Oil Resistance | Standard fuel A, completely meet clients requirements; Standard fuel B, 6572h; Hardness change -2 , volume change18%; Oil IRM-903, 15072h; Hardness change -5 , volume change2%; | Only meet some regular requirements |
Feedback Form
Other Products
- Liquid Fluorosilicone Rubber (Liquid FVMQ) Brief Description: This liquid FVMQ LFS211 is a kind of fully fluorinated two-part pumpable material. It mixed the traditional fluorosilicone wit
- Perfluoroelastomer (FFKM) Perfluoroelastomer (FFKM)Composition: This perfluoroelastomer (FFKM) is made of Terpolymer of tetrafluoroethylene, perfluoro methyl vinyl ether and
- Diamine Curing Agent Physical Properties: With aromatic cassia smell, this Diamine Curing Agent 3# is yellowish or white powder. Moreover, it is soluble in alcohol a
- Diamine Curing Agent Physical Properties: This diamine curing agent 1# is white power and it will melt at 155-160. This product will be soluble in alcohol or acetone.
- Bisphenol AF Characteristics: This bisphenol AF is white powder of crystal and can be slightly soluble in water freely soluble both in alcohol and ethyl. Its