ETW,Floor paint,China Floor paint Manufacture

Floor paint

Floor paint

Introduction
Floor paint made from epoxy resin, modified resin, activity agent, additives, etc. The product is a long lasting anticorrosion paint, as well as high adhesive strength, tight structure, high impact resistant, pulverization of salt resistant, chemical air resistant, etc. The floor paint can make the floor good looking and long lasting; it is used for floor only.

Floor paint:Technical indicators:

No.	Item	Experimental Reference	PF-5
1	Gloss	GB1743-79	88%
2	Adhesion	GB1720-79	1
3	Hardness	GB1730-79	0.76
4	Impact Strength	GB1732-79	50cm
5	Flexibility	GB1731-79	1mm
6	Wearability	GB1768-79	9.7mg
7	Impact resistance	B-30A Tester,30kg/m	Good
8	Pressure experiments	GT-200 Tester, 2500N/cm2	Good
9	Pull test	GT-200 tester	290N/cm2
10	Pressure	Forklift press for 50 times	No change
11	Water resister	GB1733-79, 7days	No change
12	Pulverization of salt	GB1771-79,1000h	No change
13	brush	TLXY Tester, 2000times	No change
14	45# petrol	GB1734-79, 30days	No change
15	200#Petrol	GB1734-79,30days	No change
16	diesel oil	GB1734-79,30days	No change
17	Temperature	1050C to 50C, for 3cycles during 16h	No change
18	H2SO4	GB1763-79, 20% H2SO4, 20days	No change
19	NaOH	GB1763-79, 20%, 30days	No change

Specifications:
Color: many kinds
Specific Gravity: 1.1
Dosage: 0.35kg/m2
The Thickness: 180um (wet)
The Thickness: 60um (dry)
Ratio: 3:1 (A:B)
Application Methods: bush, roll, spray
Solvent: Special
Surface Dry: 4hours, 23degree(2degree)
Hard Dry: 24hours, 23degree (2degree)
Solidify: 7days
The Interval between two washing:
48hours (shortest time), 15degree-25degree
30days (longest time), 15degree-25degree24hours (shortest time), 25degree-30degree
20days (longest time), 25degree-30degree
Duration period: 6months
Flash Point: 24degree

Formula 1:PF-6 Floor Paint

No.	items	Specifications	Thickness(um)
1	closed layer	Lacquer
2	Bottom layer	Lacquer +1# filling	600-2400
3	Middle layer	Lacquer +2# filling	300-500
4	Surface layer	Glossy coating	100
Total thickness	1000-3000um

Notice:
You should prepare the following material before you paint.
a. H52-84 floor paint
b. H52-84 lacquer
c. H52-83 solvent
d. 1# filling, 2# filling 3# filling
Ratio:
H52-84 lacquer (It made of two different parts): 3:2(A:B)
H52-84 paint (It made of two different parts): :1(A:B)

Formula:

	PF-7 floor paint	1# filling	2# filling	3# filling	PF-7 solvent
Closed layer					70-100
Bottom layer		380			10
Middle layer			200		5-10
Surface layer	100			200

Floor:
a. The floor should meet the GB50209-95 Standard
b. the concrete floor should paint 3 weeks (summer) after finished, in winter need 6 weeks.
c. before painting the floor must flatted, clean and dry.
d. bottom layer is not allowed, unless the closed layer have painted for 30 minutes.
e. the pain can be painted 20 minutes after mixed, the dry time will last 24hours(232degree).
f. the pain can be painted 20 minutes after mixed, the dry time will last 24hours(232degree).
g. the pain can be painted 20 minutes after mixed, the drying time will last 7 days(232degree).
h. Painting is not allowed when temperature below 10 degree and humidity more than 85%.
i. Other substance is not allowed to mix into the paint, and the paint should be use up to 4 hours.
j. Dangerous material, please keep it safe.
k. Please read the introduction carefully before use.

Feedback Form

Other Products

Anti-seawater PaintAnti-seawater PaintAnti-seawater Paint(primer, coating)Introduction Anti-seawater paint (primer, coating) is made of two parts, both primer andcoating

High Temperature Paint High Temperature PaintHigh temperature resistant paint is made from silicone resin, high temperature dye, filling and additive. The product is a high

Chlorinated Polyethylene Paint Chlorinated Polyethylene PaintWe are a China interior and exterior paint manufacturer,our chlorinated polyethylene paint is mainly used in in petroch

Chlorinated Rubber Paint Chlorinated Rubber PaintWe are a China rubber coating supplier. Chlorinated rubber paint is made from sulfonated polyethylene, resin, plasticizer, so

Anticorrosion Paint Anticorrosion PaintWe specialize in manufacturing anticorrosion paint. Anticorrosion paint (primer) is made of two different parts (A,B). This is mad