ETW,Facing Lathe S1-170B,China Facing Lathe S1-170B Manufacture

Product List

Manufacturers

Facing Lathe S1-170B

Facing Lathe S1-170B

Facing Lathe

SMTCL facing lathe is equipped with a unidirectional override clutch on the left side of the carriage, which allows for rapid feed to be entered even while the feed-shaft is engaged in normal feed mode, no matter which direction the spindle rotates. The spindle is supported at three points. Spindle braking is by means of hydraulic clutch.
This facing lathe is suitable for turning processes of rough finishing and fine finishing internally and externally, and face turning. In addition, it can also be used for turning a taper in power feed mode.

Main Technical Specifications of Facing Lathe

Item Unit			S1-170B
Max. swing diameter over bed		mm	1400
Max. length of workpiece (L)		mm	1500
Max. swing diameter over carriage		mm	800
Max. swing diameter over gap		mm	1600
Gap length		mm	440
Spindle bore		mm	100
Taper in spindle nose			Metric120 Taper: 120
Number of speeds Forward			21kinds
Number of speeds Reverse			12kinds
Spindle speed range (Eifher of the following ranges may be selected by users as required)
n1Forward		r/min	2-200
n1Reverse		r/min	2.24-178
n2Forward		r/min
2 n Reverse		r/min
Range of feeds per spindle revolution			56kinds
Longitudinal		mm	0.06-7.2
Cross		mm	0.03-3.6
Top slide		mm	0.015-1.8
Number, range of metric threads		mm
Number, range of whitworth threads		t.p.i
Number, range of module threads		mm
Number, range of diametral pitch threads		D.P
Max. travel of saddle		mm	1500
Max. cross travel of lower slide		mm	980
Max. travel of mid slide		mm	300
Max. travel of top slide		mm	200
Rapid traverse speed of tool post Longitudinal/Cross		mm/min	3740/1870
Mid slide		mm/min	935
Diameter of tailstock quill		mm
Max. travel of tailstock quill		mm
Taper in bore of tailstock quill
Power of main motor		kW	22
Overall dimensions	Length	mm	4287
	Width	mm	2370
	Height	mm	2030
Width of bed		mm	1100
Max. torque		kN.m
Max. weight of workpiece		kg	1500

Item Specification		S1-170B 1500
4-jaw chuck	630
	785
	1000
	1400
Cooling
Iillumination
Electric cabinet
Oil gun
Tools
Center	5 S25-2
Jaws
Taper attachment
Adjustable pads
Digimatic micrometer
T-slot slide
Steady rest	40-350
	80-330
	100-350
	140-260
	219-508
	219-520
Thread cutting dial

Standard rotating speed
Note:
1 For lathe length over 10000mm, the standard spindle speed is 2-200r/m.
2 To machine a shaft part, adding a roller support in the middle increases 2 tons load; adding 2 roller supports increases 4 tons support.
3 For lathes of distance between centers11000mm, the standard accessories include double saddles, double turrets and double carriages.
4 To machine a disk part, the maximum load is 2 tons.

Feedback Form

Other Products

CNC Pipe Threading Lathe SUC020, SUC8105 CNC Pipe Threading Lathe SUC020, SUC8105CNC Pipe Threading LatheThese pipe threading lathes are CNC machines with 2-axis continuous interpolation. Th

Conventional Lathe CA-A Conventional Lathe CA-AConventional LatheMain Features1. Max speed of spindle 1600r/min2. Noise of the machine less than 83dB3. Fully upgraded electr

Conventional Lathe CA-B, CA-C Conventional Lathe CA-B, CA-CConventional LatheMain FeaturesCA-B, CA-C series conventional lathes are developed from CA-A series. Spindle bore of CA-

CNC Vertical Lathe VTC3240, VTC5060, VTC6070, VTC8080 CNC Vertical Lathe VTC3240, VTC5060, VTC6070, VTC8080CNC Vertical LatheCNC Vertical Lathe VTC3240This machine tool is suitable for machining automoti

CNC Vertical Lathe with Double Turrets VTC6370d, VTC10080d, VTC12580d, GTC10080, GTC10080a CNC Vertical Lathe with Double Turrets VTC6370d, VTC10080d, VTC12580d, GTC10080, GTC10080aCNC Vertical LatheCNC Vertical Lathe with Double Turrets VT