ETW,EN 50189,China EN 50189 Manufacture

UserName: PassWord:

My account

EN 50189,China EN 50189

Product List

EN 50189

EN 50189

English

Español

العرب

EN 50189

EN 50189 Standard

Table 1. Initial Settings for Determining Stress 1% Extension
Nominal Wire Diameter, mm		Initial Stress, N/mm²	Initial setting of extensometer for a gauge length of 250mm²
1.24	2.25	100	0.125
2.25	3	200	0.25
3	4.75	300	0.375
4.75	5.5	400	0.5
For other gauge lengths, multiply the initial setting by the gauge length in mm divided by 250.

Table 2. Zinc Coating Requirements
Nominal Wire Diameter, mm		Class A		Class B		Class C		Class D		Class E
Over	Up to and incl.	Min. mass of Zn g/m2	Min. no. of one minute dips	Min. mass of Zn g/m2	Min. no. of one minute dips	Min. mass of Zn g/m2	Min. no. of one minute dips	Min. mass of Zn g/m2	Min. no. of one minute dips	Min. mass of Zn g/m2	Min. no. of one minute dips
1.24	1.5	185	2	370	3.5	150	1	365	3	185	2
1.5	1.75	200	2	400	3.5	160	1.5	460	3.5	200	2
1.75	2	215	2.5	430	4	175	2	550	4	215	2.5
2	2.25	215	2.5	430	4	175	2	550	4	250	3.5
2.25	2.75	230	3	460	4	190	2.5	640	5	250	3.5
2.75	3	230	3	460	4	190	2.5	640	5	250	3.5
3	3.5	245	3.5	490	4	205	3	730	6	250	3.5
3.5	4.25	260	3.5	520	4	260	3.5	730	6	260	3.5
4.25	4.75	275	4	550	4	275	4	775	6	275	4
4.75	5	200	4	580	5	290	4	825	6	290	4
5	5.25	290	4	580	5	290	4	825	6	290	4
5.25	5.5	290	4	580	5	290	4	825	6	290	4

Table 3. Mechanical Properties of ST1A Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile strength, MPa	Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
Over	Up to and incl.	mm	N/MM2	N/MM2	%	Mandrel diameter for wrapping test	No. of torsion twists
Over	Up to and incl.	mm	Min.	Min.	Min.	xd	Min.
1.24	1.5	0.03	1170	1400	3	1	18
1.5	1.75	0.03	1170	1400	3	1	18
1.75	2.25	0.03	1170	1400	3	1	18
2.25	2.75	0.04	1140	1350	3	1	16
2.75	3	0.05	1140	1350	3.5	1	16
3	3.5	0.05	1100	1300	3.5	1	14
3.5	4.25	0.06	1100	1300	4	1	12
4.25	4.75	0.06	1100	1300	4	1	12
4.75	5.5	0.07	1100	1300	4	1	12

Table 4. Mechanical properties of ST2B Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile strength, MPa	Elongation on 250mm	Mandrel diameter for wrapping test
Over	Up to and incl.	mm	N/MM2	N/MM2	Elongation on 250mm	Mandrel diameter for wrapping test
1.24	1.5	0.05	1100	1300	4	1
1.5	1.75	0.05	1100	1300	4	1
1.75	2.25	0.05	1100	1300	4	1
2.25	2.75	0.06	1070	1250	4	1
2.75	3	0.06	1070	1250	4	1
3	3.5	0.07	1000	1200	4	1
3.5	4.25	0.09	1000	1200	4	1
4.25	4.75	0.10	1000	1200	4	1
4.75	5.5	0.11	1000	1200	4	1

Table 5. Mechanical Properties of ST3D Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile strength, MPa	Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
Over	Up to and incl.	mm	N/MM²	N/MM²	Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
1.24	1.5	0.05	1210	1500	4	2	16
1.5	1.75	0.07	1210	1500	4	2	16
1.75	2.25	0.08	1210	1500	4	2	16
2.25	2.75	0.10	1210	15800	4	3	16
2.75	3	0.12	1210	1500	4	3	16
3	3.5	0.13	1100	1400	4	3	16
3.5	4.25	0.13	1100	1400	4	3	14
4.25	4.75	0.13	1100	1400	4	3	14
4.75	5.5	0.13	1100	1400	4	3	14

Table 6. Mechanical Properties of ST4A Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile strength, MPa	Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
over	Up to and incl.	mm	N/MM²	N/MM²	Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
1.24	1.5	0.03	1275	1670	3.5	2	12
1.5	1.75	0.03	1275	1670	3.5	2	12
1.75	2.25	0.03	1275	1670	3.5	2	12
2.25	2.75	0.04	1275	1670	4	3	12
2.75	3	0.05	1275	1670	4	3	12
3	3.5	0.05	1225	1620	4	3	12
3.5	4.25	0.06	1225	1620	4	3	12
4.25	4.75	0.06	1225	1620	4	3	12
4.75	5.5	0.07	1225	1620	4	3	12

Table 7. Mechanical Properties of ST5E Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile strength, MPa	Elongation on 250mm	Mandrel diameter for wrapping test
over	Up to and incl.	mm	N/MM2	N/MM2	Elongation on 250mm	Mandrel diameter for wrapping test
1.24	1.75	0.03	1420	1620	3.5	4
1.75	2.3	0.04	1420	1620	3.5	4
2.3	2.55	0.04	1370	1620	4	4
2.55	2.75	0.04	1370	1670	4	4
2.75	3.5	0.05	1370	1670	4	4
3.5	4.75	0.06	1370	1670	4	4
4.75	5.5	0.07	1370	1670	4	4

Table 8. Mechanical Properties of ST6C Wires
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Tensile Strength		Elongation on 250mm	Mandrel diameter for wrapping test	No. of torsion twists
Nominal wire diameter mm		Diameter tolerance	Stress at 1% extension, MPa	Min	Max
over	Up to and incl.	mm	N/MM²	N/MM²	N/MM²
1.24	1.5	0.03	1450	1700	1800	2	4	14
1.5	1.75	0.03	1450	1700	1800	2	4	14
1.75	2.25	0.04	1450	1700	1800	2	4	14
2.25	2.75	0.04	1410	1650	1750	2	4	14
2.75	3.0	0.05	1410	1650	1750	2.5	4	12
3.0	3.5	0.05	1380	1600	1700	2.5	4	12
3.5	4.25	0.06	1340	1600	1700	2.5	5	10
4.25	4.75	0.06	1340	1600	1700	2.5	5	10
4.75	5.5	0.07	1340	1600	1700	2.5	5	10

Feedback Form

Other Products

ASTM A475 ASTM A475 Standard Dia. of strand, in(mm) Minimum Breaking Strength of Strand,1bf(kN) Weight of Zine Coating, g/m2 High Strength

BS4565-1990 BS4565-1990 Standard Table 1. Initial Settings for Determining Stress 1% Extension Nominal Diameter of Galvanized Steel Wire Initi

1*7 Galvanized Stranded Wire 1*7 Galvanized Stranded Wire 1*7 Galvanized StrandedWire DescriptionOur galvanized stranded wires provide acombination of superior prope

1*19 Galvanized Stranded Wire 1*19 Galvanized Stranded Wire 1*19Galvanized Stranded WireConstruction &Diameter of 19 Strand Steel Wire Rope is 1*19/8.0-16.0mm.Featu

2.64mm Galvanized Steel Wire 2.64mm Galvanized Steel Wire DescriptionDingtai, a China-basedantirust steel wire supplier, offers a wide range of galvanized steel wires forboth ind

United States | Argentina | Brazil | China | France | Germany | Japan | Korea | Russia | Spain | Switzerland | Thailand | UAE | United Kingdom | Vietnam | Poland | Italy | Morocco | Malaysia | Portugal | India | Canada

Copyright © 2008 - ETW International. All rights reserved.