ETW,DCS Selective Band Repeater,China DCS Selective Band Repeater Manufacture

Product List

Manufacturers

DCS Selective Band Repeater

DCS Selective Band Repeater

DCS Selective Band Repeater
RCTD1G8X2365

RCTDX

The DCS selective band repeater is applied specifically in small area indoor DAS system. It provides quick coverage solution for small or weak signals and eliminates the signal dead spot, rejecting the interference and providing a stable signal communication for cell phone users. The DCS selective band repeater has power supply and output power indications. It has compact size, low power consumption and easy installation. The DCS selective band repeater can be used in basements, cars, elevators, parking lots, villages, tunnels, mines, clubs, residential houses, countryside, tall buildings, vessels, underground facilities or any other place.

Electrical Specification of DCS Selective Band Repeater
Uplink

Item	Electric SPEC		Unit	Note
Frequency range	1710-1785MHz	/	/
Operating Bandwidth	1710-1785MHz	0-75M	MHz	Customizable
Maximum Output power		0~23	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		≥ 60	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤6	dB
Ripple in band		≤6	dB
Out of band rejection	Fo+/-400kHz	≤50	dB
	Fo+/-600kHz	≤40	dB
	Fo+/-1MHz	≤35	dB
	Fo+/-5MHz	≤25	dB
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5.5	μs
Frequency Stability		≤0.05ppm	Hz

Downlink

Item	Electric SPEC		Unit	Note
Frequency range	1805-1880MHz	/	/
Operating Bandwidth	1805-1880MHz	0-75M	MHz	Customizable
Maximum Output power		0~23	dBm
ALC		\|Δ\|≤2	dB
Maximum Gain		<=65	dB
Gain Adjust Scope	1dB ～ 10dB	\|Δ\|≤1	dB
	10dB ～ 20dB	\|Δ\|≤1	dB
	20dB ～ 25dB	\|Δ\|≤1.5	dB
IM3		≤-30/30kHz	dBc
Ripple in band		≤7	dB
Out of band rejection	Fo+/-400kHz	≤50	dB
	Fo+/-600kHz	≤40
	Fo+/-1MHz	≤35
	Fo+/-5MHz	≤25
Spurious Emission	9kHz ～ 150kHz	≤-36/1kHz	dBm
	150kHz ～ 30MHz	≤-36/10kHz
	30MHz ～ 1GHz	≤-36/100kHz
	1GHz ～ 12.75GHz	≤-25/1MHz
VSWR		≤2	/
Noise Figure at Max. System Gain		≤8	dB
System Group Delay		≤5	μs
Frequency Stability		≤0.05ppm	Hz

Mechanical Characteristic of DCS Selective Band Repeater

Mechanical Characteristic
Connectors	N-female
Power Supply	DC6V 3A, AC 110~240V
Operating Temperature	-10 ℃ ~+50℃
Humidity	90%
Power Consumption	≤10W max
Dimension(DWH)	22012565( mm)
weight	≤3kg

Note: Typical specifications at room temperature. VSWR test condition is uplink and downlink ATT setting 25dB

LED Function Indication for DCS Selective Band Repeater

LED	Function	Working mode	Failure
Uplink Red Light	Warning for autoexcitation, improper and AGC over limited.	The light flickers once	Improper warning
		The light continuously flickers twice	Autoexcitation warning
		The light continuously flickers three times.	AGC over limit warning
Downlink Red Light	Warning for autoexcitation, improper, AGC over limited and invalidation of PA.	The light flickers once	Improper warning
		The light continuously flickers twice	Autoexcitation warning
		The light continuously flickers three times.	AGC over limit warning
		The light continuously flickers four times.	Warning of invalidation of PA
Green Light	Indication light of power supply	LED light is on, device is working normal.	LED light is off, device is not working normal

Our company is a specialized DCS selective band repeater manufacturer and supplier in China. In addition to pico repeater, we also offer RF module, WiFi module, SAW resonator and SAW filter.

Feedback Form

Other Products

PICO Repeater PICO Repeater PICO repeater can wirelessly transmit and magnify the uplink and downlink signals of base station, whic

CDMA Wideband Pico Repeater CDMA Wideband Pico Repeater RCTC800K1555 RCTCK-15 The CDMA wideband pico repeater is applied specifically in smal

CDMA Pico RepeaterCDMA Pico Repeater RCTC800X1555 RCTCX The CDMA pico repeater is practical for small areas indoor DAS system, with quick coverage solution for

926MHz SAW Filter 926MHz SAW Filter HDF926MS-3 Scope This specification covers the characteristics of SAW filter w

447MHz SAW Resonator 447MHz SAW Resonator HDR447.725MS-6 Scope This specification covers the charac