DSSS Interpretation System TC-RF04/08/12/16

The GONSIN TC-RF04/08/12/16 DSSS wirelessinterpretation system uses the 2.4GHz frequency band and state-of-the-art Direct Sequence Spread Spectrum (DSSS) technology to offer CD quality sound, excellent immunity from noise and interference, and high security against unauthorized listening.

The interpretation system is designed for simultaneous interpretation and language distribution in 4, 8, 12 or 16channels. With an operating range of more than 100 meters, it is ideally suited for use in business and government conferences, international conventions and other indoor and outdoor multilingual applications.

TC-RFZ04 DSSS Control Unit/Transmitter

The microprocessor based TC-RFZ04DSSS control unit is able to transmit 4 operating channels, having independent channel level controls, channel output level indicators, and channel signal outputs for sound recording. Via the DB25 cable, multiple interpreter consoles can be connected to the control unit in a daisy-chain. Four control units can be cascaded together to transmit up to 16channels inone system.

Technical Specifications
1. Modulation mode: DSSS
2. Frequency range: 2.4-2.5GHz
3. Frequency response: 20Hz to 20KHz
4. Encryption mode: AES
5. Distortion at 1 kHz: <0.5%
6. Channel separation: >70dB
7. RF output power level: 700mV
8. RF output impedance: 50 ohms
9. Input impedance: 18k ohms
10. Max. input power level: 3.5V
11. Signal-to-noise ratio: >75dB
12. Power consumption: 60 watts
13. Standby power consumption: 30 watts
14. Power requirement: 110/220VAC, 50/60Hz
15. RF outputs: 4 N-connectors
16. Audio inputs: 4 x RCA unbalanced
17. Audio outputs: 4 x RCA unbalanced
18. Operating temperature: 0 to 45
19. Storage temperature: -20 to 50
20. Dimension (WDxH): 485325x90 mm
21. Weight: 7.6kg

TC-RFJ04F/08F/12F/16F DSSS Receiver

The portable DSSS receiver, as a part of our interpretation system, is designed to receive 4, 8, 12 or 16channels with CD quality sound. The unit is powered by a rechargeable Lithium-ion battery pack. The selected channel number, battery level andsignal strength are displayed on LCD screen. When a participant is equipped with an individual DSSS receiver,hecan listen to any selected language channel on a personal headphone, monitor the battery status, check if the unit is receiving the signal properly, and adjust the volume level for comfortable listening. The floor language is heard when the interpreter turns off the microphone. Any number of receiver units can be used within the effective working range.

This receiver unit is equipped with a built-in DIP switch to set ID numbers to avoid interference when multiple GONSIN systems are used at the same venue or in the same building.

Technical Specifications
1. Frequency range: 2.4-2.5GHz
2. Modulation mode: DSSS
3. Encryption mode: AES
4. Distortion at 1 KHz: < 1.0%
5. RF output power level: 700mV
6. RF output impedance: 50 ohms
7. Input impedance: 18K ohms
8. Signal-to-noise ratio: >55dB
9. Power consumption: 0.2 W, standby: 50mW
10. LCD screen: 33mm x17mm
11. Rechargeable Li-ion battery: 3.7V 1050mAh
12. Dimension (HxWxD): 100x52x18 mm
13. Weight: 0.15kg

TC-RFF02 DSSS Antenna Unit

The TC-RFF02 high-gain directional antenna unit is designed for 2 operating channels, suitable for both indoor and outdoor applications. Having a channel selection and channel locking function, the unit is powered by the control unit via a coaxial cable. The antenna unit can be mounted on a wall or tripod stand.

Technical Specifications
1. Modulation mode: DSSS
2. Frequency range: 2.4-2.5GHz
3. Frequency channel spacing: 5 MHz
4. Impedance: 50 Ohms
5. Power gain: 14dBi
6. Feed cable: SYV 50-7 coaxial
7. Cable length: 5/10/20 meters
8. Connectors: N-type to N-type
9. Transmitting range: more than 100 meters
10. Operating temperature: 0 to 45
11. Storage temperature: -20 to 50
12. Dimension (HWD): 21145082 mm
13. Weight: 3.8kg

TC-F06/F16 Interpreter Console

1.The digitally-controlled workstation designed for 6-channel or 16-channelinterpretation system.
2. This interpreter console has the LCD screen to display the following information:
1) Channel selection and confirmation
2) Incoming/outgoing language channel number
3) All the occupied language channels
4) Channel number of this unit
5) Interpretation time for previous and presentoperation
3. Two different types of microphone can be used:
1) High quality gooseneck microphone
2) Headset boom microphone
4. This interpreter consolehas a built-in loudspeaker with volume level control unit. The loudspeaker is automatically switched off when the microphone is turned on.
5. 3 incoming channels and 2 outgoing channels are available.
6. The automatic channel interlocking function prevents the interpreters from using the same outgoing channel.
7. The MUTE key enables a brief muting of the microphone for cough cut.
8. The floor audio automatically switches to the outgoing channel when the microphone is turned off.
9. Multiple interpreter consoles can be connected in a daisy-chain.

Technical Specifications
1. Frequency response: 50Hz to 18KHz
2. Channel separation: > 85 dB
3. Signal-to-noise ratio: > 90 dB
4. Distortion at 1 KHz: < 0.1%
5. Operating voltage: 24V DC
6. Power consumption: 2.5W
7. Maximum input power level: 7.5V
8. Built-in loudspeaker: 8 ohms/2W
9. Audio input/output: 2x MIC / 2x REC unbalanced
10. Standard mic stem length: 410 mm
11. Operating temperature: 0 to 45
12. Storage temperature: -20 to 50
13. LCD screen: 128x64 backlit
14. Cable: 3m/5m/10m cable with DB25 connectors
15. Dimension (HxWxD): 95 X247X145 mm
16. Weight: 1.2kg

GX-20S Charging Case

1. The microprocessor-based unit is designed for charging and storage.
2. The charging case has a Smart charger to 20 receiver units with Li-ion battery.
3. It has DC 7.5V low voltage charging power.
4. It offers an independent indicator to monitor charging status.
5. About 10 hours are needed to fully recharge 20 receivers.
6. The charging case will be automatically cut off when it is full to avoid over charge.
7. The fully charged units may remain in the case.
8. It has an AC/DC adaptor with power cord.
9. Power input: AC100-240V 50/60Hz
10. Dimensions: 59x30x18 cm (WXDXH)

TC-D2 Interpreter Headset

1. Closed-ear stereo headset with Mic and volume control unit
2. Connectors: 3.5mm stereo plugs
3. Impedance: 6015%
4. Frequency response: 20Hz to 20KHz
5. Sensitivity (1 kHz): -582dB
6. Microphone type: Omni-directional dynamic
7. Microphone sensitivity (1 kHz): -582dB
8. Cord length: 2 meters

TC-D3 Stereo Headphone

1. Ergonomic design
2. Super heavy bass
3. Frequency response: 20 Hz - 20 kHz
4. Impedance: 32 ohms 15%
5. Sensitivity: 94dB3dB
6. Maximum power input: 30mW
7. Adjustable headband &soft foam ear pads
8. 40mm drivers for dynamic stereo sound

GONSIN is a professional DSSS wireless interpretation system manufacturer based in China. We alsoofferIR wirelessinterpretation system,digital conference system,wireless voting system,and more.